Excess air entrapped in sealed bag
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 0 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During bag forming and sealing, insufficient evacuation of headspace or inconsistent product dosing allows a larger than intended pocket of air to remain inside the bag before the final seal is made. The trapped air gives the pack an abnormal shape, apparent underfill, or reduced shelf stability, so the unit fails inspection at first pass.
Was man dagegen tut
Verify and recalibrate the vacuum or air-evacuation step prior to sealing, check for leaks or wear in the evacuation nozzle and bag-forming jaws, and tune dosing timing to avoid introducing extra air with the product. Reinforce in-process checks on headspace and seal quality to catch drift before it propagates to many packs.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,2 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [36–59 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,7 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,5 %]33 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]14 Studien
- Backwaren und Teigwaren0,4 % [0,0–1,8 %]6 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–1,8 %]6 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–1,8 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–1,7 %]4 Studien
- Zucker und Süßwaren0,5 % [0,0–1,9 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,7 %]8 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–1,8 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,7 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring bag forming and sealing, insufficient evacuation of headspace or inconsistent product dosing allows a larger than intended pocket of air to remain inside the bag before the final seal is made. The trapped air gives the pack an abnormal shape, apparent underfill, or reduced shelf stability, so the unit fails inspection at first pass.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseVision inspection or checkweigher systems flag rejects for abnormal pack shape, headspace, or weight variance without any associated machine fault or stoppage. Vacuum or evacuation pressure traces on the sealing station show deviations from setpoint during the cycles that correspond to rejected bags, while sealing time and temperature remain within normal range.
Gegenmaßnahme
Ingenieurpraktische HinweiseVerify and recalibrate the vacuum or air-evacuation step prior to sealing, check for leaks or wear in the evacuation nozzle and bag-forming jaws, and tune dosing timing to avoid introducing extra air with the product. Reinforce in-process checks on headspace and seal quality to catch drift before it propagates to many packs.
4Quellen
- Production Management Model to Reduce the Percentage of Rejected Products in a Food Company based on Lean Manufacturing Tools (2024)Quelle öffnenFehlerquote: 17,0 % · laut Bericht: “bag with extra air”
Wörtliches Zitat anzeigen
% of lots rejected due to bag with extra air | 17%
- Production Management Model to Reduce the Percentage of Rejected Products in a Food Company based on Lean Manufacturing Tools (2024)Quelle öffnenFehlerquote: 15,0 % · laut Bericht: “bag with extra air”
Wörtliches Zitat anzeigen
% of lots rejected due to bag with extra air | 15%

