foratvise
Loslegen
Eingeschlossene Studie

Production Management Model to Reduce the Percentage of Rejected Products in a Food Company based on Lean Manufacturing Tools

Quelle öffnen

1Bibliografische Angaben

Autoren
Alfredo Quintana-Lorenzo, Jimena Caceres-Belapatiño, Alberto Flores-Pérez
Jahr
2024
Publikationsorgan
International Conference on Industrial Engineering and Operations Management (IEOM)
Land
Peru
Segment
Obst- und Gemüseverarbeitung
Prozessfamilie
Schlachtung, Zerlegung und Primärverarbeitung
Studientyp
Simulation (nur Eingangsdaten)
Extraktionsumfang
Volltext
Umfang
1 Werke · — Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
The main objective of this study is to reduce the percentage of products rejected by at least 10% of a food company dedicated to the production of fruit pulp.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 3Hohes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Only post-intervention or only "best period" results are reported.0 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Conclusion, page 8)
the percentage of rejected products, starting with a percentage of 16.27%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote16,3 %Einfache Extraktion
bag with extra air
Wörtliches Zitat anzeigen (Table 3, page 6-7)
% of lots rejected due to bag with extra air | 17%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote17,0 %Einfache Extraktion
presence of seedpulping machine
Wörtliches Zitat anzeigen (Table 3, page 6-7)
% of lots rejected due to presence of seeds | 2.70%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote2,70 %Einfache Extraktion
bag improperly sealedsealing machine
Wörtliches Zitat anzeigen (Table 3, page 6-7)
% of bags improperly sealed | 16.30%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote16,3 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Conclusion, page 8)
up to a value of 7.61%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote7,61 %Einfache Extraktion
bag with extra air
Wörtliches Zitat anzeigen (Table 3, page 6-7)
% of lots rejected due to bag with extra air | 15%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote15,0 %Einfache Extraktion
presence of seedpulping machine
Wörtliches Zitat anzeigen (Table 3, page 6-7)
% of lots rejected due to presence of seeds | 2.70%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote2,70 %Einfache Extraktion

Beobachtungseinheiten

  • Fruit pulp production and packaging line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Fruit pulp production and packaging line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention