Basic Condition and Operating Standard Non-Compliance
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 3 der 112 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
The packaging machine breaks down because fundamental equipment-care practices are not sustained: cleaning, lubrication and fastening are neglected, operators lack the skill to run and adjust the machine correctly, documented operating standards are not followed, and early signs of wear or misalignment go unnoticed until they cause a stoppage. Over time this unmanaged deterioration lowers the machine condition below the point where it can run reliably, producing breakdowns, bag jams, setup difficulties and calibration drift as secondary symptoms.
Was man dagegen tut
Implement autonomous and planned maintenance: restore and sustain basic conditions through cleaning, lubrication and inspection checklists, visually mark correct settings and fastener points, and train operators to a documented operating standard with periodic skill verification. Introduce condition monitoring and daily operator checks to detect deterioration early, and audit standard-operating-procedure adherence to prevent drift back to poor practice.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,1 % [0,3–2,7 %]
- Erwarteter Anteil an der Verlustzeit
- 0,6 % [0,2–1,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [48–68 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,1 % [0,2–3,6 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,2 % [0,2–3,5 %]33 Studien
- Bier, Wein und Spirituosen1,1 % [0,2–3,9 %]14 Studien
- Backwaren und Teigwaren1,8 % [0,3–6,2 %]6 Studien
- Fleisch, Geflügel und Fisch1,2 % [0,2–4,1 %]6 Studien
- Obst- und Gemüseverarbeitung1,3 % [0,2–4,3 %]4 Studien
- Getreide- und Ölsaatenmüllerei1,3 % [0,2–4,5 %]4 Studien
- Zucker und Süßwaren1,3 % [0,2–4,6 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,2 % [0,2–4,0 %]8 Studien
- Futtermittel und Heimtiernahrung1,8 % [0,3–6,1 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,1 % [0,2–3,6 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe packaging machine breaks down because fundamental equipment-care practices are not sustained: cleaning, lubrication and fastening are neglected, operators lack the skill to run and adjust the machine correctly, documented operating standards are not followed, and early signs of wear or misalignment go unnoticed until they cause a stoppage. Over time this unmanaged deterioration lowers the machine condition below the point where it can run reliably, producing breakdowns, bag jams, setup difficulties and calibration drift as secondary symptoms.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES shows recurrent unplanned stop events on the packaging machine attributed to varying, non-specific fault codes rather than a single repeatable component signature, interspersed with short minor stops (jams, fallen bags) and occasional setup or calibration-related state changes. Downtime reason logs entered by operators frequently reference skill, standard-compliance or condition-check categories rather than a discrete mechanical or electrical fault, and mean time between failures tends to drift downward without a clear single root cause in the historian.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement autonomous and planned maintenance: restore and sustain basic conditions through cleaning, lubrication and inspection checklists, visually mark correct settings and fastener points, and train operators to a documented operating standard with periodic skill verification. Introduce condition monitoring and daily operator checks to detect deterioration early, and audit standard-operating-procedure adherence to prevent drift back to poor practice.
4Quellen
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 119 Hr. · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 13 119 25.00 100 25.54 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 13,0 events · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 13 119 25.00 100 25.54 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 44,0 Hr. · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 22 44 22.92 100 5.30 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 22,0 events · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 22 44 22.92 100 5.30 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 25,0 % · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 13 119 25.00 100 25.54 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 22,9 % · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 22 44 22.92 100 5.30 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 111 Hr. · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 13 111 25.00 44.20 23.82 42.91
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 13,0 events · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 13 111 25.00 44.20 23.82 42.91
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 313 Hr. · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 30 313 31.25 61.46 37.53 70.98
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 30,0 events · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 30 313 31.25 61.46 37.53 70.98
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 279 Hr. · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 29 279 30.21 30.21 33.45 33.45
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 29,0 events · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 29 279 30.21 30.21 33.45 33.45
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 147 Hr. · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 16 147 30.80 75.00 31.55 74.46
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 16,0 events · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 16 147 30.80 75.00 31.55 74.46
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 89,0 Hr. · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 10 89 19.20 19.20 19.09 19.09
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 10,0 events · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 10 89 19.20 19.20 19.09 19.09
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenVerlustzeit: 198 Hr. · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 15 198 15.63 77.09 23.74 94.70
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnzahl der Ereignisse: 15,0 events · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 15 198 15.63 77.09 23.74 94.70
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 25,0 % · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 13 111 25.00 44.20 23.82 42.91
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 31,3 % · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 30 313 31.25 61.46 37.53 70.98
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 30,2 % · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 29 279 30.21 30.21 33.45 33.45
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 30,8 % · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 16 147 30.80 75.00 31.55 74.46
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 19,2 % · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 10 89 19.20 19.20 19.09 19.09
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an den Verlustereignissen: 15,6 % · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 15 198 15.63 77.09 23.74 94.70
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 33,5 % · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 29 279 30.21 30.21 33.45 33.45
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 37,5 % · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 30 313 31.25 61.46 37.53 70.98
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 23,7 % · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 15 198 15.63 77.09 23.74 94.70
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 5,30 % · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 22 44 22.92 100 5.30 100
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 19,1 % · laut Bericht: “Unchecked deterioration”
Wörtliches Zitat anzeigen
1 Unchecked deterioration 10 89 19.20 19.20 19.09 19.09
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 23,8 % · laut Bericht: “Basic condition neglect”
Wörtliches Zitat anzeigen
2 Basic condition neglect 13 111 25.00 44.20 23.82 42.91
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 31,6 % · laut Bericht: “Inadequate skill level”
Wörtliches Zitat anzeigen
3 Inadequate skill level 16 147 30.80 75.00 31.55 74.46
- Maximizing Overall Equipment Effectiveness in a Food Processing Industry: A Case Study (2018)Quelle öffnenAnteil an der Verlustzeit: 25,5 % · laut Bericht: “Operating Standard not followed”
Wörtliches Zitat anzeigen
4 Operating Standard not followed 13 119 25.00 100 25.54 100
- Mittlere Ereignisdauer: 97,0 min · laut Bericht: “Setup time”
Wörtliches Zitat anzeigen
Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes
- Mittlere Ereignisdauer: 51,0 min · laut Bericht: “Idle time”
Wörtliches Zitat anzeigen
Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes
- The Application of Lean Manufacturing for the Standardization of the Canned Chicken Production Process in Peru Food Companies (2024)Quelle öffnenVerlustzeit: 40,0 min · laut Bericht: “Packaging machine decalibration”
Wörtliches Zitat anzeigen
Corrective maintenance time 33 min - 102 min - 40 min 20 min
- Improving Overall Equipment Effectiveness in the Packaging Process of Finished Cattle Feed: A Case Study of an Animal Feed Production Facility (2025)Quelle öffnenVerlustzeit: 40,0 h · laut Bericht: “Bags falling in machinery”
Wörtliches Zitat anzeigen
bags stuck on conveyor Before packaging. Bags falling in machinery. Pallet flow issues. lmoroper bag attachment. Frequent stitching adjiustments. Hour 180 40 23 16 11 Cum % 67% 82% 90% 96% 100% 180 40 23 16 11

