Heat seal defect (detached, wrinkled or folded seal)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 2 der 112 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
On form-fill-seal packaging, the longitudinal (long) or transverse (center) seal fails to bond uniformly because jaw temperature, pressure or dwell time are out of range, the sealing surfaces are worn or contaminated, or the film is misaligned, wrinkled or tensioned unevenly as it passes through the jaws. The result is a seam that detaches under handling, or a seal line that shows wrinkles or folds that compromise package integrity.
Was man dagegen tut
Calibrate and periodically verify sealing jaw temperature, pressure and dwell time against the film specification, keep sealing surfaces clean and free of wear or nicks, and ensure consistent film tension and alignment through the jaws. Perform routine seal-integrity checks (visual, burst or peel tests) and adjust parameters at the first sign of drift before rejects accumulate.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,8 % [0,2–2,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,0 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [36–59 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,9 % [0,1–3,0 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,2 %]33 Studien
- Bier, Wein und Spirituosen1,2 % [0,2–4,0 %]14 Studien
- Backwaren und Teigwaren0,9 % [0,1–3,5 %]6 Studien
- Fleisch, Geflügel und Fisch0,9 % [0,1–3,3 %]6 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,5 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,6 %]4 Studien
- Zucker und Süßwaren0,9 % [0,1–3,4 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,3 % [0,2–4,6 %]8 Studien
- Futtermittel und Heimtiernahrung0,9 % [0,1–3,1 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,9 % [0,1–3,0 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseOn form-fill-seal packaging, the longitudinal (long) or transverse (center) seal fails to bond uniformly because jaw temperature, pressure or dwell time are out of range, the sealing surfaces are worn or contaminated, or the film is misaligned, wrinkled or tensioned unevenly as it passes through the jaws. The result is a seam that detaches under handling, or a seal line that shows wrinkles or folds that compromise package integrity.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseThe line keeps running without a stoppage, but the quality or vision inspection station registers a spike in sealed-package rejects classified by defect type (detached seal, wrinkled seal), often clustered by lane or by shift and correlated with jaw temperature or pressure trends drifting outside setpoint bands. No equipment-failure alarm is raised since the defect is caught only at inspection.
Gegenmaßnahme
Ingenieurpraktische HinweiseCalibrate and periodically verify sealing jaw temperature, pressure and dwell time against the film specification, keep sealing surfaces clean and free of wear or nicks, and ensure consistent film tension and alignment through the jaws. Perform routine seal-integrity checks (visual, burst or peel tests) and adjust parameters at the first sign of drift before rejects accumulate.
4Quellen
- Fehlerquote: 120.900 lbs/week · laut Bericht: “bottom seal/end seal issues”
Wörtliches Zitat anzeigen
Since centerlining the wrappers and running at ideal settings, at the close of the project, Company XYZ was running at 120,900 pounds of salvage per week.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 14,0 % · laut Bericht: “rework caused by errors in the sealing process”
Wörtliches Zitat anzeigen
This inefficiency was attributed to three main factors: rework, accounting for 13.95% of the issue, was caused by errors in the sealing process.
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenAnzahl der Ereignisse: 112 kasus · laut Bericht: “Seal terlipat”
Wörtliches Zitat anzeigen
Seal terlipat 112 0,42 2,45
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenAnteil an den Verlustereignissen: 2,45 % · laut Bericht: “Seal terlipat”
Wörtliches Zitat anzeigen
Seal terlipat 112 0,42 2,45
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenFehlerquote: 0,420 % · laut Bericht: “Seal terlipat”
Wörtliches Zitat anzeigen
Seal terlipat 112 0,42 2,45
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnteil an den Verlustereignissen: 10,3 % · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnteil an den Verlustereignissen: 9,30 % · laut Bericht: “Long seal detached (longseal lekang)”
Wörtliches Zitat anzeigen
Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnteil an den Verlustereignissen: 7,40 % · laut Bericht: “Wrinkled seal (seal berkerut)”
Wörtliches Zitat anzeigen
Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 32,0 bungkus · laut Bericht: “Wrinkled seal (seal berkerut)”
Wörtliches Zitat anzeigen
Seal Berkerut 32 90 6 6 38
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 90,0 bungkus · laut Bericht: “Wrinkled seal (seal berkerut)”
Wörtliches Zitat anzeigen
Seal Berkerut 32 90 6 6 38
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 6,00 bungkus · laut Bericht: “Wrinkled seal (seal berkerut)”
Wörtliches Zitat anzeigen
Seal Berkerut 32 90 6 6 38
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 38,0 bungkus · laut Bericht: “Wrinkled seal (seal berkerut)”
Wörtliches Zitat anzeigen
Seal Berkerut 32 90 6 6 38
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 29,0 bungkus · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Center Seal Lekang 29 97 16 20 78
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 97,0 bungkus · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Center Seal Lekang 29 97 16 20 78
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 16,0 bungkus · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Center Seal Lekang 29 97 16 20 78
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 20,0 bungkus · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Center Seal Lekang 29 97 16 20 78
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 78,0 bungkus · laut Bericht: “Center seal detached (center seal lekang)”
Wörtliches Zitat anzeigen
Center Seal Lekang 29 97 16 20 78
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 35,0 bungkus · laut Bericht: “Long seal detached (long seal lekang)”
Wörtliches Zitat anzeigen
Long Seal Lekang 35 90 8 15 69
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 90,0 bungkus · laut Bericht: “Long seal detached (long seal lekang)”
Wörtliches Zitat anzeigen
Long Seal Lekang 35 90 8 15 69
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 8,00 bungkus · laut Bericht: “Long seal detached (long seal lekang)”
Wörtliches Zitat anzeigen
Long Seal Lekang 35 90 8 15 69
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 15,0 bungkus · laut Bericht: “Long seal detached (long seal lekang)”
Wörtliches Zitat anzeigen
Long Seal Lekang 35 90 8 15 69
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 69,0 bungkus · laut Bericht: “Long seal detached (long seal lekang)”
Wörtliches Zitat anzeigen
Long Seal Lekang 35 90 8 15 69

