Eingeschlossene Studie
Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study
1Bibliografische Angaben
- Autoren
- Jofre Alfredo Cerna-Arribasplata, Andre Moises Rivas-Atauchi, Elmer Luis Tupia De La Cruz
- Jahr
- 2025
- Publikationsorgan
- International Journal of Recent Engineering Science
- Land
- Peru
- Segment
- Bier, Wein und Spirituosen
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
This company specializes in the production of canned beer, focusing on two main product presentations, 355 ml and 473 ml.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 4.4 Results)The defective product rate showed a remarkable improvement of 56%, reducing from 2.97% to 1.30%, confirming the positive impact of the model on final product quality. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,30 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 4.4 Results)The defective product rate showed a remarkable improvement of 56%, reducing from 2.97% to 1.30%, confirming the positive impact of the model on final product quality. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 2,97 % | Beide Extraktionen übereinstimmend |
downtimeWörtliches Zitat anzeigen (Section 4.4 Results)Likewise, downtime decreased by 72%, dropping from 74 to 21 minutes, demonstrating greater operational availability of the equipment. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 21,0 min | Beide Extraktionen übereinstimmend |
downtimeWörtliches Zitat anzeigen (Section 4.4 Results)Likewise, downtime decreased by 72%, dropping from 74 to 21 minutes, demonstrating greater operational availability of the equipment. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 74,0 min | Beide Extraktionen übereinstimmend |
setup timeWörtliches Zitat anzeigen (Section 4.4 Results)Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency. | Rüsten und Einstellen | Mittlere Ereignisdauer | 41,0 min | Einfache Extraktion |
rework caused by errors in the sealing processWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)This inefficiency was attributed to three main factors: rework, accounting for 13.95% of the issue, was caused by errors in the sealing process. | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 14,0 % | Einfache Extraktion |
errors in operational developmentWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Errors in operational development, representing 39.20%, were linked to two root causes: cans failing to meet the required filling level, highlighting the need for systems such as Andon, and technical machinery failures, which accounted for 27.01% | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 39,2 % | Einfache Extraktion |
technical machinery failuresWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)technical machinery failures, which accounted for 27.01% and could be mitigated through autonomous maintenance based on 5S principles within a TPM framework. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 27,0 % | Einfache Extraktion |
process stoppages due to machineryWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 46,9 % | Einfache Extraktion |
extended equipment setup timesWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays. | Rüsten und Einstellen | Anteil an der Verlustzeit | 19,8 % | Einfache Extraktion |
setup timeWörtliches Zitat anzeigen (Section 4.4 Results)Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency. | Rüsten und Einstellen | Mittlere Ereignisdauer | 29,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.4)Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency. | Rüsten und Einstellen | Verlustzeit | 41,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.4)Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency. | Rüsten und Einstellen | Verlustzeit | 29,0 min | Einfache Extraktion |
Beobachtungseinheiten
- Canning line · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
- Canning line · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage

