foratvise
Loslegen
Leerlauf und Kurzstillstände

Unspecified minor stoppage on filling line

Leerlauf und KurzstillständeLeistungAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 7 der 120 Studien, die sie beobachten konnten (gute Evidenz).

Was passiert

The filler experiences brief interruptions arising from a variety of minor, uncatalogued disturbances (sensor blockages, small misfeeds, momentary jams, operator-cleared faults) that stop production without requiring maintenance intervention. Because the originating equipment or component is not identified in the source reports, these events are lumped together as a generic minor-stop category rather than a specific failure mode.

Was man dagegen tut

Perform a Pareto breakdown of micro-stop events by location and apparent trigger to reclassify the largest contributors into specific, actionable causes, and standardize operator clearing procedures to reduce recovery time. Where root causes remain diffuse, implement autonomous maintenance checks and sensor/guide adjustments on the filler to reduce the overall frequency of brief interruptions.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,5 % [0,5–3,3 %]
Erwarteter Anteil an der Verlustzeit
0,8 % [0,3–1,9 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–68 %]
Studien / Einheiten
120 / 162
Evidenzgrad
B

Grad B: 5 bis 9 Studien oder eine Intervallbreite zwischen 0,20 und 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,5 % [0,3–4,4 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,8 % [0,4–4,6 %]44 Studien
  • Bier, Wein und Spirituosen
    1,4 % [0,2–4,2 %]16 Studien
  • Backwaren und Teigwaren
    1,8 % [0,3–6,1 %]0 Studien
  • Fleisch, Geflügel und Fisch
    1,6 % [0,3–5,1 %]6 Studien
  • Obst- und Gemüseverarbeitung
    1,7 % [0,3–5,5 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    1,6 % [0,2–4,9 %]6 Studien
  • Zucker und Süßwaren
    1,7 % [0,2–5,6 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    2,3 % [0,4–7,5 %]6 Studien
  • Futtermittel und Heimtiernahrung
    1,7 % [0,2–5,6 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    3,1 % [0,5–9,3 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The filler experiences brief interruptions arising from a variety of minor, uncatalogued disturbances (sensor blockages, small misfeeds, momentary jams, operator-cleared faults) that stop production without requiring maintenance intervention. Because the originating equipment or component is not identified in the source reports, these events are lumped together as a generic minor-stop category rather than a specific failure mode.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA logs show numerous short machine-state transitions to a stopped or fault state on the filler, each below the minor-stop duration threshold, often without a specific alarm code or with a generic 'minor stop' tag. Event counters accumulate a high frequency of brief stops relative to longer downtime events, and no single recurring component signal dominates the pattern.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Perform a Pareto breakdown of micro-stop events by location and apparent trigger to reclassify the largest contributors into specific, actionable causes, and standardize operator clearing procedures to reduce recovery time. Where root causes remain diffuse, implement autonomous maintenance checks and sensor/guide adjustments on the filler to reduce the overall frequency of brief interruptions.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der Verlustzeit: 19,0 % · laut Bericht: “operational stoppages”
    Wörtliches Zitat anzeigen
    The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance.
  2. Anteil an der Verlustzeit: 67,0 % · laut Bericht: “planned stoppages”
    Wörtliches Zitat anzeigen
    Based on the whole company manufacturing process, the highest number of waiting waste occurs in filling machines, especially for the planned stoppages with 67% compared with the 33% for the unplanned stoppages.
  3. Anteil an der Verlustzeit: 33,0 % · laut Bericht: “unplanned stoppages”
    Wörtliches Zitat anzeigen
    Based on the whole company manufacturing process, the highest number of waiting waste occurs in filling machines, especially for the planned stoppages with 67% compared with the 33% for the unplanned stoppages.
  4. Verlustzeit: 524 min · laut Bericht: “Idling & Minor Stoppages”
    Wörtliches Zitat anzeigen
    Idling & Minor Stoppages 524 7,2 98,6
  5. Anteil an der Verlustzeit: 7,20 % · laut Bericht: “Idling & Minor Stoppages”
    Wörtliches Zitat anzeigen
    Idling & Minor Stoppages 524 7,2 98,6
  6. Anteil an den Verlustereignissen: 15,9 % · laut Bericht: “Idle and Minor Stoppage”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%.
  7. Anteil an der geplanten Zeit: 1,55 % · laut Bericht: “Idle and Minor Stoppage”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%.
  8. Verlustzeit: 0 mnt · laut Bericht: “Minor Stoppages”
    Wörtliches Zitat anzeigen
    3 Minor Stoppases 0 0 87
  9. Verlustzeit: 0 mnt · laut Bericht: “Minor Stoppages”
    Wörtliches Zitat anzeigen
    3 Minor Stoppases 0 0 87
  10. Verlustzeit: 87,0 mnt · laut Bericht: “Minor Stoppages”
    Wörtliches Zitat anzeigen
    3 Minor Stoppases 0 0 87
  11. Anteil an den Verlustereignissen: 6,67 % · laut Bericht: “Major-Minor Stoppage (Mi)”
    Wörtliches Zitat anzeigen
    กลุม Major-Minor Stoppage (Mi) ซึ่งเปนเหตุการณที่มีความรุนแรงหรือเปนปญหาเรื้อรัง มีจํานวนนอยที่สุดเพียง 163 ครั้ง หรือคิดเปนรอยละ 6.67
  12. Anzahl der Ereignisse: 163 events · laut Bericht: “Major-Minor Stoppage (Mi)”
    Wörtliches Zitat anzeigen
    กลุม Major-Minor Stoppage (Mi) ซึ่งเปนเหตุการณที่มีความรุนแรงหรือเปนปญหาเรื้อรัง มีจํานวนนอยที่สุดเพียง 163 ครั้ง หรือคิดเปนรอยละ 6.67
  13. Anzahl der Ereignisse: 1.535 events · laut Bericht: “General-Minor Stoppage (GM)”
    Wörtliches Zitat anzeigen
    พบวาเหตุการณการหยุดชะงักชั่วคราวของเครื่องจักรในระยะสั้นสวนใหญจัดอยูในกลุม General-Minor Stoppage (GM) มีจํานวนสูงสุดถึง 1,535 ครั้ง คิดเปนรอยละ 62.83 ของขอมูลทั้งหมด
  14. Anteil an den Verlustereignissen: 62,8 % · laut Bericht: “General-Minor Stoppage (GM)”
    Wörtliches Zitat anzeigen
    พบวาเหตุการณการหยุดชะงักชั่วคราวของเครื่องจักรในระยะสั้นสวนใหญจัดอยูในกลุม General-Minor Stoppage (GM) มีจํานวนสูงสุดถึง 1,535 ครั้ง คิดเปนรอยละ 62.83 ของขอมูลทั้งหมด
  15. Anzahl der Ereignisse: 745 events · laut Bericht: “Non-Minor Stoppage (X)”
    Wörtliches Zitat anzeigen
    รองลงมาคือ กลุม Non-Minor Stoppage (X) จํานวน 745 ครั้ง คิดเปนรอยละ 30.50
  16. Anteil an den Verlustereignissen: 30,5 % · laut Bericht: “Non-Minor Stoppage (X)”
    Wörtliches Zitat anzeigen
    รองลงมาคือ กลุม Non-Minor Stoppage (X) จํานวน 745 ครั้ง คิดเปนรอยละ 30.50