foratvise
Loslegen
not classifiable

Operator execution error during packaging operation

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

A generic deviation from the intended operating procedure occurs during packaging tasks, such as an incorrect action, omission or misjudgement by the operator, without a specific equipment or material failure being identified. The report does not describe the physical mechanism in enough detail to attribute the loss to a particular component or process step.

Was man dagegen tut

Reinforce standard operating procedures with clearer work instructions, visual aids and checklists at the packaging station, and strengthen operator training and certification. Improve loss reason coding at the line so that future similar events are logged with enough detail to identify the true root cause.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,6 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
57 % [45–67 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,4 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–1,8 %]33 Studien
  • Bier, Wein und Spirituosen
    0,9 % [0,1–3,2 %]14 Studien
  • Backwaren und Teigwaren
    0,7 % [0,1–2,7 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,7 % [0,1–2,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,6 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,5 %]4 Studien
  • Zucker und Süßwaren
    0,7 % [0,1–2,7 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,3 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,7 % [0,1–2,6 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,3 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

A generic deviation from the intended operating procedure occurs during packaging tasks, such as an incorrect action, omission or misjudgement by the operator, without a specific equipment or material failure being identified. The report does not describe the physical mechanism in enough detail to attribute the loss to a particular component or process step.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

In SCADA/MES logs this typically appears as an unexplained manual stop, a short anomaly flag or a state change without an associated fault code, often entered as a free-text or miscellaneous reason by the operator or shift supervisor. There is usually no correlated sensor alarm or equipment degradation signal preceding the event.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Reinforce standard operating procedures with clearer work instructions, visual aids and checklists at the packaging station, and strengthen operator training and certification. Improve loss reason coding at the line so that future similar events are logged with enough detail to identify the true root cause.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der Verlustzeit: 39,2 % · laut Bericht: “errors in operational development”
    Wörtliches Zitat anzeigen
    Errors in operational development, representing 39.20%, were linked to two root causes: cans failing to meet the required filling level, highlighting the need for systems such as Andon, and technical machinery failures, which accounted for 27.01%