Operator procedural error during operations
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Production is interrupted or degraded because an operator deviates from the standard operating procedure, misjudges a manual action, or mishandles a control or setting while conducting the process. The error is human-originated rather than a mechanical or control-system fault, and its effect ripples through whichever equipment or step was being operated at the time.
Was man dagegen tut
Reinforce standard operating procedures through refresher training, visual work instructions and poka-yoke interlocks that prevent out-of-sequence actions, and review near-miss or deviation events with operators to close recurring gaps in practice.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,6 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 56 % [45–66 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,2 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,1–2,0 %]26 Studien
- Bier, Wein und Spirituosen0,9 % [0,1–3,3 %]11 Studien
- Backwaren und Teigwaren0,6 % [0,1–2,0 %]24 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,4 %]9 Studien
- Obst- und Gemüseverarbeitung0,7 % [0,1–2,6 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,3 %]6 Studien
- Zucker und Süßwaren0,6 % [0,1–2,4 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,5 %]5 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,3 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,3 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseProduction is interrupted or degraded because an operator deviates from the standard operating procedure, misjudges a manual action, or mishandles a control or setting while conducting the process. The error is human-originated rather than a mechanical or control-system fault, and its effect ripples through whichever equipment or step was being operated at the time.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs typically show a manual mode intervention, an out-of-sequence operator action, or a parameter change entered from the HMI immediately before the stop or deviation, without any preceding equipment fault alarm. The event is often recorded under a generic or operator-attributed downtime reason code rather than a specific fault code.
Gegenmaßnahme
Ingenieurpraktische HinweiseReinforce standard operating procedures through refresher training, visual work instructions and poka-yoke interlocks that prevent out-of-sequence actions, and review near-miss or deviation events with operators to close recurring gaps in practice.
4Quellen
- Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES (2025)Quelle öffnenAnteil an der Verlustzeit: 39,2 % · laut Bericht: “errors in the conduct of operations”
Wörtliches Zitat anzeigen
Among the main causes identified, errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
- Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs (2024)Quelle öffnenAnteil an der Verlustzeit: 39,2 % · laut Bericht: “errors in the conduct of operations”
Wörtliches Zitat anzeigen
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.

