foratvise
Loslegen
Eingeschlossene Studie

Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES

Quelle öffnen

1Bibliografische Angaben

Autoren
Perez Peralta, Ronald Wilmer, Meza Estrada, Adonis
Jahr
2025
Publikationsorgan
—
DOI
—
Land
Peru
Segment
Bier, Wein und Spirituosen
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
The set-up and format change time in the packaging machine to produce beer cans should be reduced with the help of distance optimization in relation to the components for changing the format and configuration of the equipment.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
Setup timepackaging machine (filler)
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Rüsten und EinstellenVerlustzeit41,0 minEinfache Extraktion
Downtime of the process
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
Aus dem Bericht nicht klassifizierbarVerlustzeit74,0 minEinfache Extraktion
Rate of defective products
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote2,97 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.1, Initial Diagnosis)
The operational efficiency of the case study stood at 78.10% during 2022, in contrast to the industry standard of 85% (Danlyan et al., 2020).
noneOEE78,1 %Einfache Extraktion
errors in the conduct of operations
Wörtliches Zitat anzeigen (Section 4.1, Initial Diagnosis / Figure 2)
Among the main causes identified, errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit39,2 %Einfache Extraktion
reprocessing
Wörtliches Zitat anzeigen (Section 4.1, Initial Diagnosis / Figure 2)
Among the main causes identified, errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit14,0 %Einfache Extraktion
process shutdowns due to machine failures
Wörtliches Zitat anzeigen (Section 4.1, Initial Diagnosis / Figure 2)
Among the main causes identified, errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Anlagenausfall (Störungen)Anteil an der Verlustzeit46,9 %Einfache Extraktion
Setup timepackaging machine (filler)
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Rüsten und EinstellenVerlustzeit29,0 minEinfache Extraktion
Downtime of the process
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
Aus dem Bericht nicht klassifizierbarVerlustzeit22,8 minEinfache Extraktion
Rate of defective products
Wörtliches Zitat anzeigen (Section 5, Results, Table 1)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote1,30 %Einfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Rüsten und EinstellenVerlustzeit41,0 minEinfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
Aus dem Bericht nicht klassifizierbarVerlustzeit74,0 minEinfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote2,97 %Einfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Rüsten und EinstellenVerlustzeit29,0 minEinfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
Aus dem Bericht nicht klassifizierbarVerlustzeit22,8 minEinfache Extraktion
—Filler/Packer
Wörtliches Zitat anzeigen (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote1,30 %Einfache Extraktion

Beobachtungseinheiten

  • Packaging line (filler/packer) - craft brewery case study · Abfüllen · Ausgangslage
  • Packaging line (filler/packer) - craft brewery case study · Abfüllen · Nach der Intervention
  • Filler/Packer · Abfüllen · Ausgangslage
  • Filler/Packer · Abfüllen · Nach der Intervention