Eingeschlossene Studie
Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs
1Bibliografische Angaben
- Autoren
- Ronald Wilmer Perez-Peralta, Adonis Meza-Estrada, Martin Fidel Collao-Diaz
- Jahr
- 2024
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Bier, Wein und Spirituosen
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
The set-up and format change time in the packaging machine to produce beer cans should be reduced with the help of distance optimization in relation to the components for changing the format and configuration of the equipment.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 8Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 4.1 Initial Diagnosis)The operational efficiency of the case study stood at 78.10% during 2022, in contrast to the industry standard of 85% (Danlyan et al., 2020). | none | OEE | 78,1 % | Einfache Extraktion |
errors in the conduct of operationsWörtliches Zitat anzeigen (Section 4.1 Initial Diagnosis)errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 39,2 % | Einfache Extraktion |
reprocessingWörtliches Zitat anzeigen (Section 4.1 Initial Diagnosis)errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%. | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 14,0 % | Einfache Extraktion |
process shutdowns due to machine failuresWörtliches Zitat anzeigen (Section 4.1 Initial Diagnosis)errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 46,9 % | Einfache Extraktion |
setup timepacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)Setup time was reduced from 41 to 29 minutes, representing a 29% decrease. | Rüsten und Einstellen | Mittlere Ereignisdauer | 41,0 min | Einfache Extraktion |
downtime of the processpacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)Process downtime decreased from 74 to 22.75 minutes, a 69% reduction. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 74,0 min | Einfache Extraktion |
rate of defective productspacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 2,97 % | Einfache Extraktion |
setup timepacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)Setup time was reduced from 41 to 29 minutes, representing a 29% decrease. | Rüsten und Einstellen | Mittlere Ereignisdauer | 29,0 min | Einfache Extraktion |
downtime of the processpacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)Process downtime decreased from 74 to 22.75 minutes, a 69% reduction. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 22,8 min | Einfache Extraktion |
rate of defective productspacker (filler)Wörtliches Zitat anzeigen (Table 1 / Section 5 Results)The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,30 % | Einfache Extraktion |
—Filler/packerWörtliches Zitat anzeigen (Table 1, Section 5. Results)SETUP Time (min) | 41 | 30 | 29 | -29% | Rüsten und Einstellen | Verlustzeit | 41,0 min | Einfache Extraktion |
—Filler/packerWörtliches Zitat anzeigen (Table 1, Section 5. Results)Downtime of the process (min) | 74 | 45 | 22.75 | -69% | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 74,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1, Section 5. Results)Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 2,97 % | Einfache Extraktion |
—Filler/packerWörtliches Zitat anzeigen (Table 1, Section 5. Results)SETUP Time (min) | 41 | 30 | 29 | -29% | Rüsten und Einstellen | Verlustzeit | 29,0 min | Einfache Extraktion |
—Filler/packerWörtliches Zitat anzeigen (Table 1, Section 5. Results)Downtime of the process (min) | 74 | 45 | 22.75 | -69% | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 22,8 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1, Section 5. Results)Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,30 % | Einfache Extraktion |
Beobachtungseinheiten
- Whole plant (2022 diagnosis) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Packaging line (filler) · Abfüllen · Ausgangslage
- Packaging line (filler) · Abfüllen · Nach der Intervention
- Filler · Abfüllen · Ausgangslage
- Filler · Abfüllen · Nach der Intervention

