Product scrap and rejection
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 49 % der Verlustzeit der Linie. Berichtet von 4 der 127 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
Units produced during otherwise stable running fail to meet specification (weight, seal, shape, wrap or appearance) because of minor material misbehavior such as product sticking, folding or wrapping incorrectly around forming, cutting or packaging elements, and are removed from the line as scrap or rework.
Was man dagegen tut
Tighten in-process monitoring and quick-clear procedures at the forming, cutting or wrapping station, adjust guides, tooling and material tension to prevent sticking or misforming, and reinforce operator checks and minor-stop logging so root causes of scrap are tracked and corrected.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,3 % [0,4–2,9 %]
- Erwarteter Anteil an der Verlustzeit
- 0,6 % [0,2–1,4 %]
- Anteil an der Verlustzeit bei Auftreten
- 49 % [38–60 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,4 % [0,2–4,4 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,1 % [0,2–3,3 %]26 Studien
- Bier, Wein und Spirituosen1,4 % [0,2–4,3 %]11 Studien
- Backwaren und Teigwaren1,6 % [0,3–4,6 %]24 Studien
- Fleisch, Geflügel und Fisch1,9 % [0,3–5,9 %]9 Studien
- Obst- und Gemüseverarbeitung1,4 % [0,2–4,8 %]7 Studien
- Getreide- und Ölsaatenmüllerei1,4 % [0,2–4,6 %]6 Studien
- Zucker und Süßwaren1,4 % [0,2–4,4 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel2,0 % [0,3–6,5 %]5 Studien
- Futtermittel und Heimtiernahrung2,0 % [0,3–6,6 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,4 % [0,2–4,8 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseUnits produced during otherwise stable running fail to meet specification (weight, seal, shape, wrap or appearance) because of minor material misbehavior such as product sticking, folding or wrapping incorrectly around forming, cutting or packaging elements, and are removed from the line as scrap or rework.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/quality modules show an elevated scrap or reject counter and a declining first-pass yield while the line state remains mostly in run, with short, scattered micro-stop events that do not reach the equipment-failure duration threshold and are not tied to a single sustained fault code.
Gegenmaßnahme
Ingenieurpraktische HinweiseTighten in-process monitoring and quick-clear procedures at the forming, cutting or wrapping station, adjust guides, tooling and material tension to prevent sticking or misforming, and reinforce operator checks and minor-stop logging so root causes of scrap are tracked and corrected.
4Quellen
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Quelle öffnenVerlustzeit: 2,00 min · laut Bericht: “Cute Wrap Up”
Wörtliches Zitat anzeigen
Cute Wrap Up 1 1 2
- Usulan Penurunan Tingkat Kecacatan Produk Sosis Ayam di PT Charoen Pokphand Indonesia (2015)Quelle öffnenFehlerquote: 0,340 % · laut Bericht: “reject cooking”
Wörtliches Zitat anzeigen
Chicken sausages have several types of defects like wrinkled (0,9%), fungus (0,04%), and reject cooking (0,34%).
- A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production (2024)Quelle öffnenFehlerquote: 15,0 % · laut Bericht: “Scrap rate”
Wörtliches Zitat anzeigen
PokaYoke Scrap rate 15% 5% 4.00% -73.33%
- A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production (2024)Quelle öffnenAnteil an der Verlustzeit: 55,0 % · laut Bericht: “high rate of decline”
Wörtliches Zitat anzeigen
At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%).
- A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production (2024)Quelle öffnenFehlerquote: 4,00 % · laut Bericht: “Scrap rate”
Wörtliches Zitat anzeigen
PokaYoke Scrap rate 15% 5% 4.00% -73.33%
- Integrating Lean Manufacturing and TPM for Production Efficiency Improvement: A Peruvian Case Study in the Bottled Water Industry (2024)Quelle öffnenFehlerquote: 3,13 % · laut Bericht: “discards”
Wörtliches Zitat anzeigen
Discards rate % 3.13% 2% 0.96% -69.33%
- Integrating Lean Manufacturing and TPM for Production Efficiency Improvement: A Peruvian Case Study in the Bottled Water Industry (2024)Quelle öffnenFehlerquote: 0,960 % · laut Bericht: “discards”
Wörtliches Zitat anzeigen
Discards rate % 3.13% 2% 0.96% -69.33%
- Analisis Efisiensi Dan Produktivitas Mesin Produksi Keripik Telur Cumi (Keritcu) (2025)Quelle öffnenFehlerquote: 10,0 % · laut Bericht: “reject produk”
Wörtliches Zitat anzeigen
Tingkat reject produk mencapai 10%, yang cukup signifikan untuk diperbaiki.
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Quelle öffnenAnteil an der Verlustzeit: 54,7 % · laut Bericht: “Target achieve”
Wörtliches Zitat anzeigen
1 Target achieve 734.34 54.72 54.72 Vital few
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Quelle öffnenVerlustzeit: 734 hrs · laut Bericht: “Target achieve”
Wörtliches Zitat anzeigen
1 Target achieve 734.34 54.72 54.72 Vital few

