foratvise
Loslegen
Eingeschlossene Studie

A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production

Quelle öffnen

1Bibliografische Angaben

Autoren
Alexandra Katherine Rojas-Valverde, Claudia Alexandra Muñoz-Briceño
Jahr
2024
Publikationsorgan
International Conference on Industrial Engineering and Operations Management (IEOM)
Land
Peru
Segment
Backwaren und Teigwaren
Prozessfamilie
Formen, Backen und Garen
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
Figure 1 shows the production model based on Lean Manufacturing philosophy, applied to the cookie production line.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Table 2)
Centerlining Quality rate of finished products 91% 95% 95.90% 5.38%
noneQualität91,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
TPM Rate of performance of machines 89% 95% 95.00% 6.74%
noneLeistung89,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
Centerlining Quality rate of finished products 91% 95% 95.90% 5.38%
noneQualität95,9 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
TPM Rate of availability of machines 91% 95% 95.10% 4.51%
noneVerfügbarkeit91,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.2, Figure 5)
In the first quarter of the following year, the OEE further increased to 86.7%.
noneOEE86,7 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
TPM Rate of availability of machines 91% 95% 95.10% 4.51%
noneVerfügbarkeit95,1 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
TPM Rate of performance of machines 89% 95% 95.00% 6.74%
noneLeistung95,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 2)
TPM OEE 83% 95% 86.70% 4.46%
noneOEE83,0 %Beide Extraktionen übereinstimmend
Scrap rate
Wörtliches Zitat anzeigen (Table 2)
PokaYoke Scrap rate 15% 5% 4.00% -73.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote15,0 %Einfache Extraktion
high rate of decline
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%).
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit55,0 %Einfache Extraktion
high rate of defective products
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%).
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit25,0 %Einfache Extraktion
elevated unproductive times
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit20,0 %Einfache Extraktion
clogging of cookies in conveyor belt chutesconveyor belt chutes
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
Leerlauf und KurzstillständeAnteil an der Verlustzeit55,0 %Einfache Extraktion
product fragility
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit13,5 %Einfache Extraktion
inadequate sealing of packagingprimary packaging machine
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit11,5 %Einfache Extraktion
conveyor belt failuresconveyor belt
Wörtliches Zitat anzeigen (Section 4.1, Figure 2)
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit20,0 %Einfache Extraktion
Scrap rate
Wörtliches Zitat anzeigen (Table 2)
PokaYoke Scrap rate 15% 5% 4.00% -73.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote4,00 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.2, Figure 5)
In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter.
noneOEE79,6 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.2, Figure 5)
In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter.
noneOEE83,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.2, Figure 5)
In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter.
noneOEE83,4 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.2, Figure 5)
In the fourth quarter, the OEE reached 85.7%, surpassing the 85% target.
noneOEE85,7 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (page 9, section 5 Results)
Additionally, the quality rate of finished products increased from 91% to 95.90%, and the scrap rate decreased from 15% to 4.00%.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote15,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (page 9, section 5 Results)
Additionally, the quality rate of finished products increased from 91% to 95.90%, and the scrap rate decreased from 15% to 4.00%.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote4,00 %Einfache Extraktion

Beobachtungseinheiten

  • Biscuit Type D production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Biscuit Type D production line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention