foratvise
Loslegen
Eingeschlossene Studie

Integrating Lean Manufacturing and TPM for Production Efficiency Improvement: A Peruvian Case Study in the Bottled Water Industry

Quelle öffnen

1Bibliografische Angaben

Autoren
Salvatore Balza Tassara-Chumbiauca, Mateo Rodrigo Gordillo-Egúsquiza
Jahr
2024
Publikationsorgan
International Conference on Industrial Engineering and Operations Management (IEOM)
Land
Peru
Segment
Erfrischungsgetränke, abgefülltes Wasser und Säfte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
180 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
This case study concerns a company involved in the bottling of table water in 20-litre containers, including polyethylene, polycarbonate and polypropylene drums.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 13Geringes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
material shortages
Wörtliches Zitat anzeigen (Section 4.3, Inventory Management Improvements)
The downtime caused by material shortages was reduced by 80%, from 15,558 hours to 3,111 hours.
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit3.111 hBeide Extraktionen übereinstimmend
unplanned stoppages
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
the total downtime due to unplanned stoppages was reduced from 3.79 hours to 2.46 hours per week, representing a reduction of 35.09%.
Anlagenausfall (Störungen)Verlustzeit2,46 h/weekBeide Extraktionen übereinstimmend
material shortages
Wörtliches Zitat anzeigen (Section 4.3, Inventory Management Improvements)
the lack of proper inventory management was responsible for 15,558 hours of downtime due to material shortages, resulting in a financial loss of S/33,760.86.
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit15.558 hBeide Extraktionen übereinstimmend
unplanned machine stoppages
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
The bottleneck analysis revealed that unplanned machine stoppages accounted for a total downtime of 3.79 hours per week, which had a direct impact on the overall production capacity and efficiency of the plant.
Anlagenausfall (Störungen)Verlustzeit3,79 h/weekBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Real production rate bottels/hr 74.06 99.60 92.93 25.48%
noneDurchsatz74,1 bottels/hrBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Quality rate % 96.87% 99% 99% 2.20%
noneQualität99,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Quality rate % 96.87% 99% 99% 2.20%
noneQualität96,9 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Performance rate % 76.83% 95% 94% 22.35%
noneLeistung94,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Performance rate % 76.83% 95% 94% 22.35%
noneLeistung76,8 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Washing Process)
The production rate increased from 74.05 to 92.37 botellones per hour, which resulted in a substantial improvement in overall plant efficiency.
noneDurchsatz92,4 botellones/hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
The plant's OEE increased from 54.67% to 71%, reflecting the gains in efficiency achieved through the implementation of TPM.
noneOEE71,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
The plant's OEE increased from 54.67% to 71%, reflecting the gains in efficiency achieved through the implementation of TPM.
noneOEE54,7 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
This led to a significant improvement in the availability of equipment, which increased from 73.45% to 76%, allowing the plant to operate at higher efficiency levels.
noneVerfügbarkeit73,5 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Washing Process)
the total process time for washing was calculated at 13.81 hours, with a production rate of 74.05 botellones per hour.
noneDurchsatz74,1 botellones/hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Bottling Process)
The overall equipment effectiveness (OEE) in this process increased from 54.67% to 68.19%, reflecting the substantial gains in efficiency achieved through the implementation of the standardization procedures.
noneOEE54,7 %Einfache Extraktion
non-value-added tasks (manual inspection, placement of caps, storage of finished products)
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Bottling Process)
The analysis showed that these inefficiencies resulted in an excessive time consumption of about 2.59 hours in non-value-added tasks.
Aus dem Bericht nicht klassifizierbarVerlustzeit2,59 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Bottling Process)
The production yield increased from 76.83% to 94.02%, and the quality of the final product improved from 96.87% to 99.22%, bringing it closer to world-class standards.
noneAusbeute94,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Bottling Process)
The production yield increased from 76.83% to 94.02%, and the quality of the final product improved from 96.87% to 99.22%, bringing it closer to world-class standards.
noneQualität99,2 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.3, Standardization of the Bottling Process)
The overall equipment effectiveness (OEE) in this process increased from 54.67% to 68.19%, reflecting the substantial gains in efficiency achieved through the implementation of the standardization procedures.
noneOEE68,2 %Einfache Extraktion
discards
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Discards rate % 3.13% 2% 0.96% -69.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote3,13 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.3, Implementation of Total Productive Maintenance (TPM))
This led to a significant improvement in the availability of equipment, which increased from 73.45% to 76%, allowing the plant to operate at higher efficiency levels.
noneVerfügbarkeit76,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Real production rate bottels/hr 74.06 99.60 92.93 25.48%
noneDurchsatz92,9 bottels/hrEinfache Extraktion
discards
Wörtliches Zitat anzeigen (Table 1, Results of validation of the proposed model)
Discards rate % 3.13% 2% 0.96% -69.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0,960 %Einfache Extraktion
product defects
Wörtliches Zitat anzeigen (Table 1, page 118)
Discards rate | % | 3.13% | 2% | 0.96% | -69.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote3,13 %Einfache Extraktion
washing process cycle time including non-value-added activitieswashing equipment
Wörtliches Zitat anzeigen (Section 4.3 Standardization of the Washing Process, page 108)
the total process time for washing was calculated at 13.81 hours, with a production rate of 74.05 botellones per hour.
Aus dem Bericht nicht klassifizierbarVerlustzeit13,8 hoursEinfache Extraktion
product defects
Wörtliches Zitat anzeigen (Table 1, page 118)
Discards rate | % | 3.13% | 2% | 0.96% | -69.33%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0,960 %Einfache Extraktion
optimized washing process cycle timewashing equipment
Wörtliches Zitat anzeigen (Section 4.3 Standardization of the Washing Process, page 108)
the process time was reduced from 13.81 hours to 7.07 hours, representing a time reduction of 48.79%.
Aus dem Bericht nicht klassifizierbarVerlustzeit7,07 hoursEinfache Extraktion
optimized bottling process cycle timebottling and packaging equipment
Wörtliches Zitat anzeigen (Section 4.3 Standardization of the Bottling Process, page 115)
the cycle time decreased from 5.10 hours to 2.51 hours, representing a 50.78% reduction in time.
Aus dem Bericht nicht klassifizierbarVerlustzeit2,51 hoursEinfache Extraktion

Beobachtungseinheiten

  • Plant (whole bottling plant) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Plant (whole bottling plant) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Washing process · Behälterreinigung und Spülen · Nach der Intervention
  • Washing process · Behälterreinigung und Spülen · Ausgangslage
  • Bottling process · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Bottling process · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Bottled water packaging line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Bottled water packaging line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention