foratvise
Loslegen
Rüsten und Einstellen

Syrup batching changeover and setup time

Rüsten und EinstellenVerfügbarkeitMischen und Vermengen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 2 der 31 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

Between successive syrup batches the mixing tank must be emptied, cleaned if required, recharged with water and ingredients, and brought to the target concentration, temperature and homogeneity before the batch is released to the filling line. This preparation sequence, together with recipe selection and verification, consumes time during which no usable syrup is produced.

Was man dagegen tut

Standardize and pre-stage ingredient quantities, automate recipe loading and parameter checks in the batch control system, and overlap tank cleaning or charging with upstream or downstream line activities so that the preparation sequence runs in parallel rather than in series with filling demand.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,3 % [0,3–3,8 %]
Erwarteter Anteil an der Verlustzeit
0,7 % [0,1–2,1 %]
Anteil an der Verlustzeit bei Auftreten
57 % [45–67 %]
Studien / Einheiten
31 / 40
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,5 % [0,1–5,7 %]6 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    2,2 % [0,2–7,8 %]2 Studien
  • Bier, Wein und Spirituosen
    1,5 % [0,2–5,7 %]0 Studien
  • Backwaren und Teigwaren
    2,1 % [0,2–7,3 %]2 Studien
  • Fleisch, Geflügel und Fisch
    1,6 % [0,1–5,9 %]1 Studie
  • Obst- und Gemüseverarbeitung
    1,5 % [0,1–6,0 %]2 Studien
  • Getreide- und Ölsaatenmüllerei
    1,6 % [0,1–6,1 %]0 Studien
  • Zucker und Süßwaren
    1,5 % [0,1–5,8 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,5 % [0,1–5,1 %]3 Studien
  • Futtermittel und Heimtiernahrung
    1,4 % [0,2–5,3 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,5 % [0,1–5,4 %]7 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Between successive syrup batches the mixing tank must be emptied, cleaned if required, recharged with water and ingredients, and brought to the target concentration, temperature and homogeneity before the batch is released to the filling line. This preparation sequence, together with recipe selection and verification, consumes time during which no usable syrup is produced.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA shows an extended batch or setup state between the end of discharge of the previous batch and the start of stable mixing, with recipe-load and ingredient-charging events clustered in this window; total batch lead time recorded by the system is dominated by this non-productive segment rather than by active mixing time.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardize and pre-stage ingredient quantities, automate recipe loading and parameter checks in the batch control system, and overlap tank cleaning or charging with upstream or downstream line activities so that the preparation sequence runs in parallel rather than in series with filling demand.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 140 min · laut Bericht: “total leading time of syrup batching process”
    Wörtliches Zitat anzeigen
    Total leading time of recently batching syrup process for new product is 140 minutes.
  2. Verlustzeit: 98,0 min · laut Bericht: “total leading time of syrup batching process”
    Wörtliches Zitat anzeigen
    The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11.
  3. Mittlere Ereignisdauer: 27,3 min · laut Bericht: “Total Time”
    Wörtliches Zitat anzeigen
    Total Time 27.25 18.22 9.04
  4. Mittlere Ereignisdauer: 18,2 min · laut Bericht: “Total Time”
    Wörtliches Zitat anzeigen
    Total Time 27.25 18.22 9.04