HFCS transfer pump flow below design capacity
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 64 % der Verlustzeit der Linie. Berichtet von 1 der 31 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The pump and pipeline used to transfer and filter high-fructose corn syrup (HFCS) deliver flow below the design or target rate, so the syrup feed to the mixing/batching stage proceeds more slowly than the ideal cycle. Undersized or worn pump components, pipeline friction losses, filter fouling, or high syrup viscosity restrict achievable flow, extending the transfer step without stopping it outright.
Was man dagegen tut
Renovate or upsize the pump and pipeline system (correct pump curve selection, larger line diameter, reduced bends/fittings) to restore design transfer capacity, and optimize operating pressure to match the required flow. Implement scheduled cleaning or replacement of transfer filters and periodic inspection of pump wear components to prevent progressive flow degradation.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,2 % [0,2–3,7 %]
- Erwarteter Anteil an der Verlustzeit
- 0,8 % [0,1–2,4 %]
- Anteil an der Verlustzeit bei Auftreten
- 64 % [50–76 %]
- Studien / Einheiten
- 31 / 40
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,4 % [0,1–5,2 %]6 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte2,1 % [0,2–8,4 %]2 Studien
- Bier, Wein und Spirituosen1,5 % [0,1–5,8 %]0 Studien
- Backwaren und Teigwaren1,4 % [0,1–5,4 %]2 Studien
- Fleisch, Geflügel und Fisch1,5 % [0,1–6,2 %]1 Studie
- Obst- und Gemüseverarbeitung1,4 % [0,1–5,6 %]2 Studien
- Getreide- und Ölsaatenmüllerei1,5 % [0,1–6,1 %]0 Studien
- Zucker und Süßwaren1,4 % [0,1–5,3 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,5 % [0,1–5,8 %]3 Studien
- Futtermittel und Heimtiernahrung1,4 % [0,1–5,1 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,4 % [0,1–5,4 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe pump and pipeline used to transfer and filter high-fructose corn syrup (HFCS) deliver flow below the design or target rate, so the syrup feed to the mixing/batching stage proceeds more slowly than the ideal cycle. Undersized or worn pump components, pipeline friction losses, filter fouling, or high syrup viscosity restrict achievable flow, extending the transfer step without stopping it outright.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show the syrup transfer or mixing-fill state running for longer than the standard cycle time while pump speed or flow-rate signals sit below setpoint without triggering a fault alarm. Flow totalizer rate and pump discharge pressure trend lower than nominal, and downstream mixing or filling stations may show intermittent starvation tied to the slow transfer, with no associated stop/alarm counter increment.
Gegenmaßnahme
Ingenieurpraktische HinweiseRenovate or upsize the pump and pipeline system (correct pump curve selection, larger line diameter, reduced bends/fittings) to restore design transfer capacity, and optimize operating pressure to match the required flow. Implement scheduled cleaning or replacement of transfer filters and periodic inspection of pump wear components to prevent progressive flow degradation.
4Quellen
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenVerlustzeit: 35,0 min · laut Bericht: “high fructose corn sugar transfer period”
Wörtliches Zitat anzeigen
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenDurchsatz: 10,8 m3/h · laut Bericht: “pump flow rate below design capacity”
Wörtliches Zitat anzeigen
The actual pump capacity just reach to 3.5-3.8 bar and the corresponding flow is 10.8 m3/h.
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenVerlustzeit: 20,0 min · laut Bericht: “pumping of sugar solution (HFCS transfer) after pump/pipeline renovation”
Wörtliches Zitat anzeigen
The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system.
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenAnteil an der Verlustzeit: 10,7 % · laut Bericht: “pump and pipeline renovation (HFCS transfer time reduction)”
Wörtliches Zitat anzeigen
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm (as shown on Figure 12), the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenMittlere Ereignisdauer: 35,0 min · laut Bericht: “HFCS transfer and filtering through pump system”
Wörtliches Zitat anzeigen
The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline).
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenMittlere Ereignisdauer: 20,0 min · laut Bericht: “HFCS transfer and filtering after pump pressure and pipeline optimization”
Wörtliches Zitat anzeigen
After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm ... the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%).

