Eingeschlossene Studie
Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company
1Bibliografische Angaben
- Autoren
- Stefanía Carolina Huerta Sánchez, Cesar David Mesia Perez, Rafael Mauricio Villanueva Flores, Jorge Alfredo Montoya Barragán
- Jahr
- 2025
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Erfrischungsgetränke, abgefülltes Wasser und Säfte
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The study was conducted on a specific bottling line.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 5Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
mechanical failuresWörtliches Zitat anzeigen (Section 1 Introduction)16,800 minutes/year lost to changeover times (setup), 1,120 minutes/year due to mechanical failures, 42,336 defective units/year, and 17,472 minutes/year spent searching for tools. | Anlagenausfall (Störungen) | Verlustzeit | 1.120 min/year | Beide Extraktionen übereinstimmend |
format changeover (Set Up)Wörtliches Zitat anzeigen (Section 4.2)A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time. | Rüsten und Einstellen | Verlustzeit | 16.800 min/year | Beide Extraktionen übereinstimmend |
tool searchWörtliches Zitat anzeigen (Section 4.1)During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 17.472 min/year | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Abstract / Section 3)an improvement of Overall Equipment Effectiveness (OEE) from 62% to 83% | none | OEE | 62,0 % | Beide Extraktionen übereinstimmend |
non-conformanceWörtliches Zitat anzeigen (Table 1)Defect rate (%) 9.62% 5.80 – 6.00 % – 40 % | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 9,62 % | Einfache Extraktion |
tool searchWörtliches Zitat anzeigen (Section 4.1)During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 10,9 % | Einfache Extraktion |
format changeover (Set Up)Wörtliches Zitat anzeigen (Section 4.2)A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time. | Rüsten und Einstellen | Anteil an der geplanten Zeit | 10,5 % | Einfache Extraktion |
mechanical failurereverse osmosis systemWörtliches Zitat anzeigen (Section 4.3)Mechanical failure downtime improved from 15.38% (73.83 min/shift) to 2.59% (12.44 min/shift) following implementation. | Anlagenausfall (Störungen) | Verlustzeit | 73,8 min/shift | Einfache Extraktion |
mechanical failurereverse osmosis systemWörtliches Zitat anzeigen (Section 4.3)Mechanical failure downtime improved from 15.38% (73.83 min/shift) to 2.59% (12.44 min/shift) following implementation. | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 15,4 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 5 Testing and Results, page 5)the initial non-conformance rate was 9.62% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 9,62 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Introduction, page 2)The technical diagnostic identified key causes, including 16,800 minutes/year lost to changeover times (setup), 1,120 minutes/year due to mechanical failures, 42,336 defective units/year, and 17,472 minutes/year spent searching for tools. | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 42.336 units/year | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 5 Testing and Results, page 5)The initial analysis revealed that the production line recorded a productivity level of 12.53 L/sol, representing a 34.7% deviation below the industry benchmark of 19.2 L/sol | none | Durchsatz | 12,5 L/sol | Einfache Extraktion |
Beobachtungseinheiten
- Water bottling line (As-Is diagnostic) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage

