Unspecified packaging line loss
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 5 der 112 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
These labels record a generic time loss on the packaging line without identifying the specific component, failure mode, jam type or startup activity responsible; authors report only the aggregated loss bucket (a short stop or a startup-related loss) rather than its underlying physical or organisational cause. The loss may stem from any of several unreported events clearing automatically or by brief operator intervention, or from product/line behaviour during the ramp-up period.
Was man dagegen tut
Improve loss-reason granularity by configuring the line's downtime tracking system to require specific fault codes for every short stop and startup event, and train operators to log the actual cause at the moment of clearance. Periodically review the catch-all or default reason codes to reclassify recurring events into specific, actionable categories.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,4 % [0,4–3,2 %]
- Erwarteter Anteil an der Verlustzeit
- 0,8 % [0,2–1,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,4 % [0,2–4,6 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,5 % [0,3–4,1 %]33 Studien
- Bier, Wein und Spirituosen1,9 % [0,3–5,5 %]14 Studien
- Backwaren und Teigwaren2,2 % [0,3–7,3 %]6 Studien
- Fleisch, Geflügel und Fisch1,5 % [0,2–5,0 %]6 Studien
- Obst- und Gemüseverarbeitung1,6 % [0,2–5,3 %]4 Studien
- Getreide- und Ölsaatenmüllerei1,5 % [0,2–5,0 %]4 Studien
- Zucker und Süßwaren1,6 % [0,2–5,1 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel2,0 % [0,3–6,1 %]8 Studien
- Futtermittel und Heimtiernahrung1,6 % [0,2–5,2 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,4 % [0,2–4,5 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThese labels record a generic time loss on the packaging line without identifying the specific component, failure mode, jam type or startup activity responsible; authors report only the aggregated loss bucket (a short stop or a startup-related loss) rather than its underlying physical or organisational cause. The loss may stem from any of several unreported events clearing automatically or by brief operator intervention, or from product/line behaviour during the ramp-up period.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseIn SCADA/MES data this appears as short machine-state transitions to stopped or reduced-output states with generic or default fault codes, or as a startup-phase flag with below-target output and rejects before stabilisation; no specific alarm tag, sensor fault or component identifier is logged. Event duration and counters are captured but the associated reason code remains blank, defaulted, or mapped to a catch-all category.
Gegenmaßnahme
Ingenieurpraktische HinweiseImprove loss-reason granularity by configuring the line's downtime tracking system to require specific fault codes for every short stop and startup event, and train operators to log the actual cause at the moment of clearance. Periodically review the catch-all or default reason codes to reclassify recurring events into specific, actionable categories.
4Quellen
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Quelle öffnenAnteil an der geplanten Zeit: 20,6 % · laut Bericht: “overall plant down time”
Wörtliches Zitat anzeigen
One year's data was gathered and it showed an average down time of 20.625 %; therefore, the plant's actual production was down by 20.625 % of its maximum capacity.
- Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat (2020)Quelle öffnenAnteil an der Verlustzeit: 0,350 % · laut Bericht: “Breakdown Losses”
Wörtliches Zitat anzeigen
Breakdown Losses 1,38% 0,35% 100%
- Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat (2020)Quelle öffnenAnteil an der Verlustzeit: 3,81 % · laut Bericht: “Scrap Losses”
Wörtliches Zitat anzeigen
Scrap Losses 14,86% 3,81% 99,6%
- Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat (2020)Quelle öffnenAnteil an der Verlustzeit: 24,9 % · laut Bericht: “Speed Losses”
Wörtliches Zitat anzeigen
Speed Losses 96,94% 24,87% 88,4%
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 46,9 % · laut Bericht: “process stoppages due to machinery”
Wörtliches Zitat anzeigen
Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays.
- Analisis Overall Equipment Effectiveness (OEE) pada Mesin Single-Line di PT. ZYX (2025)Quelle öffnenVerlustzeit: 41,7 min · laut Bericht: “Planned downtime”
Wörtliches Zitat anzeigen
Rata-rata 41.68 401.25 10.12 97.07% 11.68 96.73%
- Analisis Overall Equipment Effectiveness (OEE) pada Mesin Single-Line di PT. ZYX (2025)Quelle öffnenVerlustzeit: 10,1 min · laut Bericht: “Unplanned downtime (trouble mesin)”
Wörtliches Zitat anzeigen
Rata-rata 41.68 401.25 10.12 97.07% 11.68 96.73%
- Analisis Overall Equipment Effectiveness (OEE) pada Mesin Single-Line di PT. ZYX (2025)Quelle öffnenVerlustzeit: 41,7 min · laut Bericht: “Planned downtime”
Wörtliches Zitat anzeigen
Rata-rata 41.68 401.25 10.12 97.07% 11.68 96.73%
- Analisis Overall Equipment Effectiveness (OEE) pada Mesin Single-Line di PT. ZYX (2025)Quelle öffnenVerlustzeit: 11,7 min · laut Bericht: “Unplanned downtime (trouble mesin)”
Wörtliches Zitat anzeigen
Rata-rata 41.68 401.25 10.12 97.07% 11.68 96.73%
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenAnteil an der Verlustzeit: 0 % · laut Bericht: “Startup loss”
Wörtliches Zitat anzeigen
Startup loss 0
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenAnteil an der Verlustzeit: 20,0 % · laut Bericht: “Small stop loss”
Wörtliches Zitat anzeigen
Small stop loss 20
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Quelle öffnenVerlustzeit: 3,48 min · laut Bericht: “Travel time”
Wörtliches Zitat anzeigen
Travel time 3.48 min 2.03 min -1.45 min
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Quelle öffnenVerlustzeit: 2,03 min · laut Bericht: “Travel time”
Wörtliches Zitat anzeigen
Travel time 3.48 min 2.03 min -1.45 min

