foratvise
Loslegen
organizational external

Packing line starvation/blocking due to upstream or downstream imbalance

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 2 der 112 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The packing line stands idle not because of an internal fault but because it either receives insufficient product from the upstream process (starvation) or cannot discharge finished goods because there is no downstream demand, order, or storage capacity (blocking). This reflects a mismatch between the capacity or rate of the packing line and the capacity, rate, or business pull of the adjacent processes or market, rather than a mechanical or control failure of the packer itself.

Was man dagegen tut

Size and manage intermediate buffers or accumulation conveyors to decouple the packing line from rate variability of neighboring processes, balance line speeds across the production chain, and align production scheduling, demand forecasting, and order release with packing line capacity to minimize starvation and blocking events.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,8 % [0,2–2,0 %]
Erwarteter Anteil an der Verlustzeit
0,5 % [0,1–1,1 %]
Anteil an der Verlustzeit bei Auftreten
56 % [44–66 %]
Studien / Einheiten
112 / 155
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,9 % [0,1–3,1 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,8 % [0,1–2,3 %]33 Studien
  • Bier, Wein und Spirituosen
    0,9 % [0,1–2,8 %]14 Studien
  • Backwaren und Teigwaren
    0,9 % [0,1–3,2 %]6 Studien
  • Fleisch, Geflügel und Fisch
    1,0 % [0,1–3,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    1,0 % [0,1–3,5 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    1,4 % [0,2–5,1 %]4 Studien
  • Zucker und Süßwaren
    1,0 % [0,1–3,4 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,9 % [0,1–3,3 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,9 % [0,1–3,2 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,3 % [0,2–4,4 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The packing line stands idle not because of an internal fault but because it either receives insufficient product from the upstream process (starvation) or cannot discharge finished goods because there is no downstream demand, order, or storage capacity (blocking). This reflects a mismatch between the capacity or rate of the packing line and the capacity, rate, or business pull of the adjacent processes or market, rather than a mechanical or control failure of the packer itself.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES shows the packing line in a waiting or idle state with no active fault or alarm, while upstream equipment either runs below the packer's demand rate or is stopped, and/or downstream buffers, accumulation conveyors, or storage silos read full; stop-reason logs are tagged as starved or blocked rather than as mechanical downtime, and the pattern often coincides with order or shift-schedule boundaries.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Size and manage intermediate buffers or accumulation conveyors to decouple the packing line from rate variability of neighboring processes, balance line speeds across the production chain, and align production scheduling, demand forecasting, and order release with packing line capacity to minimize starvation and blocking events.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 1.680 min · laut Bericht: “Waiting for WIP”
    Wörtliches Zitat anzeigen
    Menunggu WIP 1680 86%
  2. Anteil an der Verlustzeit: 2,00 % · laut Bericht: “lack of product input to the packing line (upstream losses)”
    Wörtliches Zitat anzeigen
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  3. Verlustzeit: 952 min · laut Bericht: “lack of product input to the packing line (upstream losses)”
    Wörtliches Zitat anzeigen
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  4. Anteil an der Verlustzeit: 13,0 % · laut Bericht: “lack of demand (downstream losses)”
    Wörtliches Zitat anzeigen
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
  5. Verlustzeit: 8.260 min · laut Bericht: “lack of demand (downstream losses)”
    Wörtliches Zitat anzeigen
    Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).