foratvise
Loslegen
Eingeschlossene Studie

Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit

Quelle öffnen

1Bibliografische Angaben

Autoren
Jose Boaventura Rodrigues, Antonio Carlos Dantas Cabral
Jahr
2017
Publikationsorgan
Brazilian journal of food technology/Brazilian Journal of Food Technology
Land
Brazil
Segment
Getreide- und Ölsaatenmüllerei
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
88 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
a case study was conducted by collecting data from the packing unit along a four-month period in a soy processing plant located in Brazil.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
automation failurespacking equipment
Wörtliches Zitat anzeigen (Section 3.1, Figure 9)
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit6,00 %Beide Extraktionen übereinstimmend
worn parts or equipment breakdownpacking equipment
Wörtliches Zitat anzeigen (Section 3.1, Figure 9)
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit13,0 %Beide Extraktionen übereinstimmend
mechanical adjustmentspacking equipment
Wörtliches Zitat anzeigen (Section 3.1, Figure 9)
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit23,0 %Durch Schiedsentscheid
unscheduled operational adjustmentspacking equipment
Wörtliches Zitat anzeigen (Section 3.1, Figure 9)
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit26,0 %Durch Schiedsentscheid
electrical failurespacking equipment
Wörtliches Zitat anzeigen (Section 3.1, Figure 9)
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit26,0 %Beide Extraktionen übereinstimmend
lack of product input to the packing line (upstream losses)packing line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit2,00 %Durch Schiedsentscheid
lack of product input to the packing line (upstream losses)packing line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit952 minDurch Schiedsentscheid
lack of demand (downstream losses)packing line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Anteil an der Verlustzeit13,0 %Durch Schiedsentscheid
lack of demand (downstream losses)packing line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit8.260 minDurch Schiedsentscheid
packaging failurepacking line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Leerlauf und KurzstillständeAnteil an der Verlustzeit22,0 %Durch Schiedsentscheid
packaging failurepacking line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Leerlauf und KurzstillständeVerlustzeit11.079 minDurch Schiedsentscheid
non-scheduled maintenancepacking line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Anlagenausfall (Störungen)Anteil an der Verlustzeit58,0 %Beide Extraktionen übereinstimmend
non-scheduled maintenancepacking line
Wörtliches Zitat anzeigen (Section 3.1, Figure 8)
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
Anlagenausfall (Störungen)Verlustzeit29.010 minBeide Extraktionen übereinstimmend
—packing line
Wörtliches Zitat anzeigen (Section 3.1 Results and discussion)
Based on the expected improvement (existing OEE of 53.9% versus OEE of 74.1% for the proposed scenario) it is possible to estimate the financial benefit possibly achieved after the improvement plan is implemented.
noneOEE53,9 %Beide Extraktionen übereinstimmend

Beobachtungseinheiten

  • Packing line · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage