Eingeschlossene Studie
Penerapan Metode Total Productive Maintenance untuk Mereduksi Downtime pada Lini Produksi Botol 1 di PT. Grahamas Intitirta
1Bibliografische Angaben
- Autoren
- Afifah Azra Laila, Chaznin R. Muhammad, Nita P.A Hidayat
- Jahr
- 2020
- Publikationsorgan
- Prosiding Teknik Industri
- DOI
- —
- Land
- Indonesia
- Segment
- Erfrischungsgetränke, abgefülltes Wasser und Säfte
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Nur Abstract
- Umfang
- 1 Werke · 1 Linien · 2 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
PT. Grahamas Intitirta (PT. GI) is a mineral water company.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 4Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Blowing 1Wörtliches Zitat anzeigen (abstract)The results showed that the Filling 1 and Blowing 1 had an Overall Equipment Effectiveness (OEE) below the standard, namely 76.13% and 83.32%. | none | OEE | 83,3 % | Beide Extraktionen übereinstimmend |
—Filling 1Wörtliches Zitat anzeigen (abstract)The results showed that the Filling 1 and Blowing 1 had an Overall Equipment Effectiveness (OEE) below the standard, namely 76.13% and 83.32%. | none | OEE | 76,1 % | Beide Extraktionen übereinstimmend |
downtimeFilling 1Wörtliches Zitat anzeigen (abstract)This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 394 hours | Durch Schiedsentscheid |
downtimeBlowing 1Wörtliches Zitat anzeigen (abstract)This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 91,4 hours | Durch Schiedsentscheid |
breakdown lossFilling 1Wörtliches Zitat anzeigen (Abstract, Results section)This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours. | Anlagenausfall (Störungen) | Verlustzeit | 67,6 h | Einfache Extraktion |
defect lossBlowing 1Wörtliches Zitat anzeigen (Abstract, Results section)This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours. | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 14,8 h | Einfache Extraktion |
Beobachtungseinheiten
- Blowing 1 · Formen, Gießen und Dosieren · Ausgangslage
- Filling 1 · Abfüllen · Ausgangslage
- Filling 1 · Abfüllen · Nach der Intervention
- Blowing 1 · Formen, Gießen und Dosieren · Nach der Intervention

