foratvise
Loslegen
Eingeschlossene Studie

Peningkatan Overall Equipment Effectiveness (OEE) dengan Pendekatan Total Productive Maintenance (TPM) di Line X PT Kraft Ultrajaya Indonesia

Quelle öffnen

1Bibliografische Angaben

Autoren
Faizal Agni Akbar, Aviasti
Jahr
2023
Publikationsorgan
Bandung Conference Series Industrial Engineering Science
Land
Indonesia
Segment
Milchprodukte
Prozessfamilie
Gesamtwerk oder nicht spezifiziert
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Nur Abstract
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
PT Kraft Ultrajaya Indonesia is a manufacturing company specializing in cheese processing.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Abstract)
increase OEE from 83% to 86%.
noneOEE86,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
Quality ratio from 95% to 96%
noneQualität96,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
The implementation of CIL and OPL to increase the Performance value from 92% to 95%
noneLeistung95,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
Quality ratio from 95% to 96%
noneQualität95,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
The implementation of CIL and OPL to increase the Performance value from 92% to 95%
noneLeistung92,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
line X has an average value of Overall Equipment Effectiveness (OEE) of 83%.
noneOEE83,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Abstract)
Based on data for November 2021, Line X has a high downtime of 4,840 minutes.
Aus dem Bericht nicht klassifizierbarVerlustzeit4.840 minBeide Extraktionen übereinstimmend
Idling and Minor Stoppage
Wörtliches Zitat anzeigen (Abstract)
the loss factors that affect the OEE line X value are Idling and Minor Stoppage with a percentage of 8%, Setup and Adjustment with a percentage of 5%, Defect Amount with a percentage of 4%.
Leerlauf und KurzstillständeAnteil an der Verlustzeit8,00 %Einfache Extraktion
Setup and Adjustment
Wörtliches Zitat anzeigen (Abstract)
the loss factors that affect the OEE line X value are Idling and Minor Stoppage with a percentage of 8%, Setup and Adjustment with a percentage of 5%, Defect Amount with a percentage of 4%.
Rüsten und EinstellenAnteil an der Verlustzeit5,00 %Einfache Extraktion
Defect Amount
Wörtliches Zitat anzeigen (Abstract)
the loss factors that affect the OEE line X value are Idling and Minor Stoppage with a percentage of 8%, Setup and Adjustment with a percentage of 5%, Defect Amount with a percentage of 4%.
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit4,00 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (abstract)
Idling and Minor Stoppage with a percentage of 8%
Leerlauf und KurzstillständeAnteil an der geplanten Zeit8,00 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (abstract)
Setup and Adjustment with a percentage of 5%
Rüsten und EinstellenAnteil an der geplanten Zeit5,00 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (abstract)
Defect Amount with a percentage of 4%
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der geplanten Zeit4,00 %Einfache Extraktion

Beobachtungseinheiten

  • Line X · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Line X · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage