foratvise
Loslegen
Eingeschlossene Studie

Losses analysis of nuggets production on the forming line machine at PT XYZ

Quelle öffnen

1Bibliografische Angaben

Autoren
Nita Kuswardhani, Bambang Herry Purnomo, Nanda Sintya Fitri Salsabila
Jahr
2024
Publikationsorgan
AIP conference proceedings
Land
—
Segment
Fleisch, Geflügel und Fisch
Prozessfamilie
Formen, Backen und Garen
Studientyp
Einzelfallstudie
Extraktionsumfang
Nur Abstract
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
365 Tage
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
The nugget production process in the forming line uses a semi automation machine that runs continuously.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 8Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
reduced speed lossesforming line machine
Wörtliches Zitat anzeigen (Abstract)
the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78%
Verringerte GeschwindigkeitAnteil an der Verlustzeit23,8 %Beide Extraktionen übereinstimmend
yield lossesforming line machine
Wörtliches Zitat anzeigen (Abstract)
the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78%
Anlaufverluste (verminderte Ausbeute)Anteil an der Verlustzeit24,4 %Beide Extraktionen übereinstimmend
idling & minor stoppages lossesforming line machine
Wörtliches Zitat anzeigen (Abstract)
the three biggest factors that caused the low value of machine effectiveness were idling & minor stoppages losses of 24.61%, yield losses of 24.37%, and reduced speed losses of 23.78%
Leerlauf und KurzstillständeAnteil an der Verlustzeit24,6 %Beide Extraktionen übereinstimmend

Beobachtungseinheiten

  • Forming line · Formen, Gießen und Dosieren · Ausgangslage