foratvise
Loslegen
Prozessfehler (Ausschuss und Nacharbeit)

Improper container seal (cap/bag sealing defect)

Prozessfehler (Ausschuss und Nacharbeit)QualitätVerschließen und Falzen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 2 der 82 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The capping or sealing head applies insufficient, excessive, or misaligned torque/pressure/heat to the closure (cap, lid, or bag seal), so the seal does not achieve the required hermetic integrity. Contributing factors include worn or misadjusted sealing tooling, incorrect cap or film feed, variable container or closure dimensions, and contamination on the sealing surface.

Was man dagegen tut

Perform preventive maintenance and calibration of capping/sealing heads (torque, pressure, temperature settings) and verify tooling wear and alignment against cap and container specifications. Implement in-line leak or seal-integrity checks with automatic rejection and feedback to adjust sealing parameters in real time.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,9 % [0,2–2,5 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,2 %]
Anteil an der Verlustzeit bei Auftreten
48 % [37–60 %]
Studien / Einheiten
82 / 109
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,0 % [0,1–3,8 %]11 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,9 % [0,1–2,8 %]26 Studien
  • Bier, Wein und Spirituosen
    2,0 % [0,3–6,5 %]11 Studien
  • Backwaren und Teigwaren
    1,1 % [0,1–4,2 %]0 Studien
  • Fleisch, Geflügel und Fisch
    1,1 % [0,1–3,7 %]7 Studien
  • Obst- und Gemüseverarbeitung
    1,1 % [0,1–3,7 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    1,1 % [0,1–3,8 %]3 Studien
  • Zucker und Süßwaren
    1,1 % [0,1–4,2 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,0 % [0,1–3,6 %]4 Studien
  • Futtermittel und Heimtiernahrung
    1,1 % [0,1–4,1 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,0 % [0,1–3,7 %]9 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The capping or sealing head applies insufficient, excessive, or misaligned torque/pressure/heat to the closure (cap, lid, or bag seal), so the seal does not achieve the required hermetic integrity. Contributing factors include worn or misadjusted sealing tooling, incorrect cap or film feed, variable container or closure dimensions, and contamination on the sealing surface.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Vision or torque-check stations downstream flag rejects for leak, torque-out-of-range, or seal-integrity failure; reject counters at the capper/sealer rise while upstream speed and cycle time remain nominal. MES quality logs show clustered defect codes tied to the capping or sealing station ID without an associated machine fault or stoppage.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Perform preventive maintenance and calibration of capping/sealing heads (torque, pressure, temperature settings) and verify tooling wear and alignment against cap and container specifications. Implement in-line leak or seal-integrity checks with automatic rejection and feedback to adjust sealing parameters in real time.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anzahl der Ereignisse: 7,00 Boxes x 12 · laut Bericht: “Improperly sealed bottles”
    Wörtliches Zitat anzeigen
    Improperly sealed bottles Average 11 7
  2. Anzahl der Ereignisse: 11,0 Boxes x 12 · laut Bericht: “Improperly sealed bottles”
    Wörtliches Zitat anzeigen
    Improperly sealed bottles Average 11 7
  3. Zeit zwischen Ereignissen: 3.598 min · laut Bericht: “BFM”
    Wörtliches Zitat anzeigen
    its MTBF is 3597.62 min, and mean monthly failure frequency is 5.08.
  4. Anzahl der Ereignisse: 61,0 events · laut Bericht: “BFM”
    Wörtliches Zitat anzeigen
    Total 61 21 24 22 17 7 11 10 8 181
  5. Verlustzeit: 2.540 min · laut Bericht: “BFM”
    Wörtliches Zitat anzeigen
    Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
  6. Fehlerquote: 16,3 % · laut Bericht: “bag improperly sealed”
    Wörtliches Zitat anzeigen
    % of bags improperly sealed | 16.30%
  7. Fehlerquote: 18,0 % · laut Bericht: “improperly sealed bottles”
    Wörtliches Zitat anzeigen
    The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process.
  8. Anzahl der Ereignisse: 967 pcs · laut Bericht: “D1 type filling”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  9. Anzahl der Ereignisse: 1.586 pcs · laut Bericht: “slanted lid”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  10. Anzahl der Ereignisse: 5.204 pcs · laut Bericht: “folded TE”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  11. Anzahl der Ereignisse: 479 pcs · laut Bericht: “closed perched”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  12. Anzahl der Ereignisse: 5.551 pcs · laut Bericht: “broken bride”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  13. Anzahl der Ereignisse: 12.279 pcs · laut Bericht: “without closed”
    Wörtliches Zitat anzeigen
    waste defect D1 type filling of 967 pcs, slanted lid of 1,586 pcs, folded TE of 5,204 pcs, closed perched 479 pcs, broken bride 5,551 pcs and without closed 12,279 pcs.
  14. Anteil an den Verlustereignissen: 1,90 % · laut Bericht: “without close”
    Wörtliches Zitat anzeigen
    Example : reject without close in week 48 = 2821/11775x100%=1.938089172=1.9%