Eingeschlossene Studie
Improving press machine efficiency using a TPM approach and Six Big Losses analysis
1Bibliografische Angaben
- Autoren
- Supriyati Supriyati, Tri Ngudi Wiyatno
- Jahr
- 2025
- Publikationsorgan
- Journal Industrial Servicess
- Land
- —
- Segment
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Nur Abstract
- Umfang
- 1 Werke · — Linien · 1 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
This study aims to improve the efficiency of press machines in the food manufacturing industry by implementing the Total Productive Maintenance (TPM) method and analyzing the Six Big Losses.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 6Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—press machineWörtliches Zitat anzeigen (abstract)The results indicate that the average OEE is 84%, which falls below the 85% standard recommended by the Japan Institute of Plant Maintenance (JIPM). | none | OEE | 84,0 % | Beide Extraktionen übereinstimmend |
equipment failurespress machineWörtliches Zitat anzeigen (abstract)The primary causes of low efficiency are idling and minor stoppages (48%) and equipment failures (28%), both of which are influenced by a lack of preventive maintenance and errors in machine settings. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 28,0 % | Beide Extraktionen übereinstimmend |
idling and minor stoppagespress machineWörtliches Zitat anzeigen (abstract)The primary causes of low efficiency are idling and minor stoppages (48%) and equipment failures (28%), both of which are influenced by a lack of preventive maintenance and errors in machine settings. | Leerlauf und Kurzstillstände | Anteil an der Verlustzeit | 48,0 % | Beide Extraktionen übereinstimmend |
Beobachtungseinheiten
- Press machine · Formen, Gießen und Dosieren · Ausgangslage

