foratvise
Loslegen
Eingeschlossene Studie

Innovation in Smart Maintenance: An IoT-Based Strategy to Improve Packaging Machine Availability in a SME

Quelle öffnen

1Bibliografische Angaben

Autoren
Susy Delzo-Fajardo, Rosa Grandez-Ulloa, Martin Saenz-Moron, Anita Straujuma
Jahr
2025
Publikationsorgan
LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development (LEIRD)
Land
Peru
Segment
Getreide- und Ölsaatenmüllerei
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 2 Maschinen
Beobachtungszeitraum
365 Tage
Datenerhebung
maintenance_records
Intervention
Umfeld laut Studie anzeigen
a SME in the food industry dedicated to the production and packaging of cereal-based products, a significant problem has been identified: low availability of the two machines on the oat-packaging line.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
material supply delays
Wörtliches Zitat anzeigen (Table II (continued))
High downtime rate due to material supply delays 2.44% 1.85% 0.63%
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der geplanten Zeit2,44 %Beide Extraktionen übereinstimmend
outsourced spare parts supply
Wörtliches Zitat anzeigen (Table II (continued))
High downtime rate due to outsourced spare parts supply 2.56% 1.95% 0.61%
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der geplanten Zeit2,56 %Beide Extraktionen übereinstimmend
friction between components caused by burnt lubricant
Wörtliches Zitat anzeigen (Table II (continued))
High downtime rate due to friction between components caused by burnt lubricant 3.45% 2.17% 2.90%
Leerlauf und KurzstillständeAnteil an der geplanten Zeit3,45 %Beide Extraktionen übereinstimmend
recurrent failures in mechanical and pneumatic components
Wörtliches Zitat anzeigen (Table II)
High downtime rate due to recurrent failures in mechanical and pneumatic components 7.65% 1.03% 2.06%
Anlagenausfall (Störungen)Anteil an der geplanten Zeit7,65 %Beide Extraktionen übereinstimmend
component blockage caused by residue buildup
Wörtliches Zitat anzeigen (Table II)
High downtime rate due to component blockage caused by residue buildup 10.39% 6.52% 3.48%
Leerlauf und KurzstillständeAnteil an der geplanten Zeit10,4 %Beide Extraktionen übereinstimmend
unplanned downtime
Wörtliches Zitat anzeigen (Table III)
High rate of unplanned downtime 21.49% 6.63% 8.45%
Aus dem Bericht nicht klassifizierbarAnteil an der geplanten Zeit21,5 %Beide Extraktionen übereinstimmend
stockouts of spare parts and maintenance materials
Wörtliches Zitat anzeigen (Table III)
High downtime rate due to stockouts 5% 3.80% 1.24%
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der geplanten Zeit5,00 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table IV)
Availability 86.64% 90% 95.36%
noneVerfügbarkeit86,6 %Beide Extraktionen übereinstimmend
unplanned downtime
Wörtliches Zitat anzeigen (Conclusions)
unplanned downtime was reduced by 68.68%, from 445 hours to 139.4 hours, due to the incorporation of scheduled downtime for the execution of periodic maintenance activities
Aus dem Bericht nicht klassifizierbarVerlustzeit445 hEinfache Extraktion
stockouts of spare parts and maintenance materials
Wörtliches Zitat anzeigen (Conclusions)
stockouts of spare parts and maintenance materials were reduced by shortening supply lead times by 78.78%, from 84 hours to 17.82 hours
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit84,0 hEinfache Extraktion
—Packaging Machine 1
Wörtliches Zitat anzeigen (Table I)
Time between stops of Packaging Machine 1 EXPO(1400)
Aus dem Bericht nicht klassifizierbarZeit zwischen Ereignissen1.400 minEinfache Extraktion
—Packaging Machine 2
Wörtliches Zitat anzeigen (Table I)
Time between stops of Packaging Machine 2 EXPO(1344)
Aus dem Bericht nicht klassifizierbarZeit zwischen Ereignissen1.344 minEinfache Extraktion

Beobachtungseinheiten

  • Oatmeal packaging line (Machines 1 and 2, aggregate) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Packaging Machine 1 · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Packaging Machine 2 · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage