Abdomen cut depth/position deviation
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 50 % of the line's lost time. Reported by 2 of the 39 studies that could observe it (sparse evidence).
What happens
The abdomen cutter blade or guide loses correct alignment relative to the product due to size variation, product positioning drift, blade wear or mechanical play, so the cut is too shallow (abdomen not opened), too irregular (poorly cut) or too deep (viscera nicked or cut). Variability in product size and orientation on the line amplifies the deviation because the cutting geometry is fixed while the incoming material is not.
What is done about it
Standardize incoming product sizing/grading before the cutter, maintain a scheduled blade sharpening or replacement interval, and verify or adjust cutter alignment and depth setting against product-size classes with periodic in-process checks. Where feasible, use size-sensing or adaptive depth control to adjust the cut automatically to product dimensions.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.9% [0.2–2.8%]
- Expected share of lost time
- 0.5% [0.1–1.4%]
- Share of lost time when present
- 50% [40–62%]
- Studies / units
- 39 / 48
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products1.1% [0.1–4.3%]5 studies
- Soft drinks, bottled water and juices1.1% [0.1–4.5%]1 study
- Brewing, wine and spirits1.1% [0.1–4.5%]0 studies
- Bakery and pasta1.2% [0.1–4.8%]0 studies
- Meat, poultry and seafood1.6% [0.2–5.9%]5 studies
- Fruit and vegetable processing1.1% [0.1–4.0%]6 studies
- Grain and oilseed milling1.1% [0.1–4.8%]3 studies
- Sugar and confectionery1.1% [0.1–4.3%]3 studies
- Snacks, coffee, tea and other foods1.1% [0.1–4.3%]3 studies
- Animal feed and pet food1.1% [0.1–4.3%]5 studies
- Food manufacturing (unspecified or mixed)1.1% [0.1–4.5%]8 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe abdomen cutter blade or guide loses correct alignment relative to the product due to size variation, product positioning drift, blade wear or mechanical play, so the cut is too shallow (abdomen not opened), too irregular (poorly cut) or too deep (viscera nicked or cut). Variability in product size and orientation on the line amplifies the deviation because the cutting geometry is fixed while the incoming material is not.
How it looks in SCADA data
Engineering guidanceQuality/inspection stations log rising counts of under-cut, irregular-cut and viscera-damage rejects on the abdomen-cutter station without a corresponding stop or fault alarm on the machine, since the equipment keeps running normally. Downstream sorting or rework stations show increased reject diversion rate correlated with specific product-size batches or blade-usage time since last change.
Countermeasure
Engineering guidanceStandardize incoming product sizing/grading before the cutter, maintain a scheduled blade sharpening or replacement interval, and verify or adjust cutter alignment and depth setting against product-size classes with periodic in-process checks. Where feasible, use size-sensing or adaptive depth control to adjust the cut automatically to product dimensions.
4Sources
- Share of loss events: 23.6 % · as reported: “poorly cut abdomen”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- Share of loss events: 56.6 % · as reported: “viscera cut”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- Share of loss events: 33.1 % · as reported: “viscera cut”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- Share of loss events: 48.9 % · as reported: “poorly cut abdomen”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- Share of loss events: 19.8 % · as reported: “abdomen not cut”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- Share of loss events: 18.0 % · as reported: “abdomen not cut”
Show verbatim quote
Na Linha 1, o principal fator de contaminação foi o abdome mal cortado (48,9%), seguido do corte de vísceras (33,1%) e de abdome não cortado (18,0%). Na Linha 2 o principal fator foi o corte de vísceras (56,6%), seguido de abdome mal cortado (23,6%) e abdome não cortado (19,8%).
- การเพิ่มประสิทธิภาพกระบวนการบรรจุหีบห่อขวดน้ำอัดลม: การลดเวลาการ เปลี่ยนอะไหล่และการปรับตั้งค่าเครื่องจักรในสายการผลิต PET5 (2025)Open sourceLost time: 5.00 min · as reported: “Switching up the film-cutting cutter”
Show verbatim quote
สับคัตเตอร์แบ่งฟิล์มขึ้น 1 5

