foratvise
Get Started
Equipment failure (breakdowns)

Reactive maintenance restart delay

Equipment failure (breakdowns)AvailabilityDrying

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 28 studies that could observe it (sparse evidence).

What happens

The dryer suffers an unplanned functional failure that is handled through reactive (unplanned) maintenance rather than a planned or condition-based approach, so diagnosis, parts retrieval and repair take place only after the breakdown occurs. Once the repair is finished, the dryer still needs time to re-establish stable thermal, airflow and moisture conditions, which extends the effective downtime well beyond the repair work itself.

What is done about it

Shift from reactive to condition-based or preventive maintenance with critical spare parts pre-staged, and define a standardized restart checklist and ramp-up curve for the dryer so stable conditions are reached as quickly as possible after any repair.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.1% [0.2–3.6%]
Expected share of lost time
0.6% [0.1–2.0%]
Share of lost time when present
57% [45–67%]
Studies / units
28 / 32
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.3% [0.1–5.3%]5 studies
  • Soft drinks, bottled water and juices
    1.3% [0.1–5.8%]1 study
  • Brewing, wine and spirits
    1.3% [0.1–5.4%]0 studies
  • Bakery and pasta
    1.3% [0.1–5.6%]0 studies
  • Meat, poultry and seafood
    1.4% [0.1–5.9%]0 studies
  • Fruit and vegetable processing
    1.3% [0.1–5.5%]2 studies
  • Grain and oilseed milling
    1.3% [0.1–5.8%]1 study
  • Sugar and confectionery
    1.2% [0.1–4.8%]4 studies
  • Snacks, coffee, tea and other foods
    1.8% [0.2–6.9%]4 studies
  • Animal feed and pet food
    1.3% [0.1–5.1%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.3% [0.1–5.5%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The dryer suffers an unplanned functional failure that is handled through reactive (unplanned) maintenance rather than a planned or condition-based approach, so diagnosis, parts retrieval and repair take place only after the breakdown occurs. Once the repair is finished, the dryer still needs time to re-establish stable thermal, airflow and moisture conditions, which extends the effective downtime well beyond the repair work itself.

How it looks in SCADA data

Engineering guidance

Fault alarm triggers a long machine-down state; the downtime log shows a repair interval followed by an additional extended ramp-up segment during which temperature, humidity and belt/airflow readings are outside normal operating band before stabilizing. Repeated stop-repair-restart cycles for the same asset appear as separate, clustered downtime events with no preceding preventive work order.

Countermeasure

Engineering guidance

Shift from reactive to condition-based or preventive maintenance with critical spare parts pre-staged, and define a standardized restart checklist and ramp-up curve for the dryer so stable conditions are reached as quickly as possible after any repair.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 24.5 h · as reported: “restart delays and reactive maintenance”
    Show verbatim quote
    January | 30.5 | 24.5 | 689 | 96
  2. Lost time: 10.7 h · as reported: “restart delays and reactive maintenance”
    Show verbatim quote
    March | 33.33 | 10.67 | 700 | 98