Included study
Impact of welding steel rod rotor bars on ripple mill efficiency and cost-effectiveness at Sumatera Jaya Agro Lestari Sawit Coconut Plant
1Bibliographic record
- Authors
- Sudirman Lubis, Rafsanzani Pane, Irpansyah Siregar
- Year
- 2023
- Venue
- Jurnal POLIMESIN
- Country
- Indonesia
- Segment
- Grain and oilseed milling
- Process family
- Milling, extraction and separation
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · 1 machines
- Observation period
- —
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
at PT. Sumatera Jaya Agro Lestari Palm Oil Mill Tayan Kalimantan West, it can be concluded that the results of the welding against the steel rood ripple mill process can increase the efficiency of the kernel
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 6High risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
whole nut (Wn)ripple mill rotor bar / steel rodShow verbatim quote (Table 1)Wn 20.1 g 1.95 | Process defects (scrap and rework) | Defect rate | 1.95 % | Single extractor |
broke nut (Bn)ripple mill rotor bar / steel rodShow verbatim quote (Table 1)Bn 106.7 g 8.73 | Process defects (scrap and rework) | Defect rate | 8.73 % | Single extractor |
—ripple millShow verbatim quote (Table 1)Eff. RM 89.32 | none | Yield | 89.3 % | Single extractor |
whole nut (Wn)ripple mill rotor bar / steel rodShow verbatim quote (Table 2)Wn 15. 6 g 1.48 | Process defects (scrap and rework) | Defect rate | 1.48 % | Single extractor |
broke nut (Bn)ripple mill rotor bar / steel rodShow verbatim quote (Table 2)Bn 89.7 g 10.14 | Process defects (scrap and rework) | Defect rate | 10.1 % | Single extractor |
—ripple millShow verbatim quote (Table 2)Eff. RM 88.38 | none | Yield | 88.4 % | Single extractor |
whole nut (Wn)ripple mill rotor bar / steel rodShow verbatim quote (Table 3)Wn 9.4 g 0.89 | Process defects (scrap and rework) | Defect rate | 0.890 % | Single extractor |
broke nut (Bn)ripple mill rotor bar / steel rodShow verbatim quote (Table 3)Bn 53.6 g 5.09 | Process defects (scrap and rework) | Defect rate | 5.09 % | Single extractor |
—ripple millShow verbatim quote (Table 3)Eff.RM 94.02 | none | Yield | 94.0 % | Single extractor |
whole nut (Wn)ripple mill rotor bar / steel rodShow verbatim quote (Table 4)Wn 12.8 g 1.23 | Process defects (scrap and rework) | Defect rate | 1.23 % | Single extractor |
broke nut (Bn)ripple mill rotor bar / steel rodShow verbatim quote (Table 4)Bn 54.7 g 5.29 | Process defects (scrap and rework) | Defect rate | 5.29 % | Single extractor |
—ripple millShow verbatim quote (Table 4)Eff.RM 93.48 | none | Yield | 93.5 % | Single extractor |
—ripple millShow verbatim quote (Abstract)the efficiency of the impact of welding steel rod averages 93.38% achieving a very high efficiency | none | Yield | 93.4 % | Single extractor |
Observation units
- Ripple mill (worn-out steel rod) · Milling and grinding · Baseline
- Ripple mill (welded/repaired steel rod) · Milling and grinding · After intervention

