foratvise
Get Started
Included study

The combination of the kaizen approach with the Design of Experiment (DoE) method for improving quality of the bread and donut products in SMEs

Open source

1Bibliographic record

Authors
Tri Ngudi Wiyatno, Hibarkah Kurnia, Isria Miharti Maherni Putri, Rifal Nugroho
Year
2024
Venue
OPSI
Country
—
Segment
Bakery and pasta
Process family
Forming, baking and cooking
Study type
Before/after intervention
Extraction scope
Abstract only
Size
1 plants · — lines · — machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
SME customers of bread and donut products sometimes complain about the visual quality of bread and donut products that are stale, burnt, and dirty.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 4High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
bread and donut defects (not rise, burnt, dirty)
Show verbatim quote (abstract)
This research resulted in a decrease in defects of 65% from 3.84% to 1.07%.
Process defects (scrap and rework)Defect rate3.84 %Single extractor
bread and donut defects (not rise, burnt, dirty)
Show verbatim quote (abstract)
This research resulted in a decrease in defects of 65% from 3.84% to 1.07%.
Process defects (scrap and rework)Defect rate1.07 %Single extractor

Observation units

  • SME bread and donut production · Whole line or unspecified equipment · Baseline
  • SME bread and donut production · Whole line or unspecified equipment · After intervention