foratvise
Get Started
Included study

Waste Minimization in Peanut Snack Production using Lean Manufacturing tools: a Case Study

Open source

1Bibliographic record

Authors
Yadhira Nicole Aldave-Vasquez, Stephanny Morales-Vargas, Jorge Antonio Corzo-Chávez
Year
2024
Venue
International Journal of Environmental Pollution and Remediation
Country
Peru
Segment
Snacks, coffee, tea and other foods
Process family
Whole plant or unspecified
Study type
Before/after intervention
Extraction scope
Full text
Size
1 plants · 1 lines · 3 machines
Observation period
14 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
The study company is dedicated to the production of salty peanut snacks, with sweet, spicy and mixed coverage; These products are marketed in different presentations, however, this research will focus on the presentation of a box of 144 packages of 38 g each, corresponding to the salted peanut production line.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 6High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Only post-intervention or only "best period" results are reported.0 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
error rate in semi-toastingtoasting machine
Show verbatim quote (Abstract)
The results of the Poka Yoke template showed reduced error rates: 4.25% in selection process, 2.86% in toasting and 2.73% in the semi-toasting.
Process defects (scrap and rework)Defect rate2.73 %Both extractors agreed
error rate in toastingtoasting machine
Show verbatim quote (Abstract)
The results of the Poka Yoke template showed reduced error rates: 4.25% in selection process, 2.86% in toasting and 2.73% in the semi-toasting.
Process defects (scrap and rework)Defect rate2.86 %Both extractors agreed
error rate in selection process
Show verbatim quote (Abstract)
The results of the Poka Yoke template showed reduced error rates: 4.25% in selection process, 2.86% in toasting and 2.73% in the semi-toasting.
Process defects (scrap and rework)Defect rate4.25 %Both extractors agreed

Observation units

  • Semi-toasting process · Cooking and frying · After intervention
  • Toasting process · Cooking and frying · After intervention
  • Selection process · Separation (centrifugation, filtration, membranes) · After intervention