foratvise
Loslegen
Anlagenausfall (Störungen)

Dough Divider Jam or Mechanical Failure

Anlagenausfall (Störungen)VerfügbarkeitFormen, Gießen und Dosieren

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 59 % der Verlustzeit der Linie. Berichtet von 2 der 76 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The divider mechanism that portions the dough or product into pieces becomes jammed by material buildup, misaligned components, worn blades or pistons, or a mechanical breakdown, forcing the line to stop until the unit is cleared or repaired. Related losses occur when the divider must be partially disassembled and reassembled to clear the obstruction or to change the forming tooling, adding downtime beyond the repair itself.

Was man dagegen tut

Implement preventive maintenance with scheduled inspection and replacement of wear parts (blades, pistons, seals), verify correct alignment and calibration after every reassembly, and standardize a quick-release tooling design with a documented procedure to reduce disassembly and reassembly time. Train operators to recognize early jam indicators and to clear obstructions safely without full teardown whenever possible.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,0 % [0,2–2,6 %]
Erwarteter Anteil an der Verlustzeit
0,6 % [0,1–1,6 %]
Anteil an der Verlustzeit bei Auftreten
59 % [49–70 %]
Studien / Einheiten
76 / 96
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,1 % [0,1–4,2 %]5 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,0 % [0,1–3,5 %]11 Studien
  • Bier, Wein und Spirituosen
    1,2 % [0,1–4,6 %]0 Studien
  • Backwaren und Teigwaren
    1,8 % [0,3–5,3 %]25 Studien
  • Fleisch, Geflügel und Fisch
    1,2 % [0,1–4,6 %]3 Studien
  • Obst- und Gemüseverarbeitung
    1,2 % [0,1–4,3 %]3 Studien
  • Getreide- und Ölsaatenmüllerei
    1,2 % [0,1–4,4 %]0 Studien
  • Zucker und Süßwaren
    1,1 % [0,1–3,9 %]8 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,1 % [0,1–3,4 %]7 Studien
  • Futtermittel und Heimtiernahrung
    1,1 % [0,1–4,0 %]6 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,1 % [0,1–4,0 %]8 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The divider mechanism that portions the dough or product into pieces becomes jammed by material buildup, misaligned components, worn blades or pistons, or a mechanical breakdown, forcing the line to stop until the unit is cleared or repaired. Related losses occur when the divider must be partially disassembled and reassembled to clear the obstruction or to change the forming tooling, adding downtime beyond the repair itself.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA logs show the divider equipment code transitioning to a fault or stopped state with cycle counter frozen, often accompanied by a torque or motor current spike just before the stop; downstream forming or baking stations show starvation while upstream feed accumulates or is blocked. Stop durations cluster bimodally, short bursts consistent with jam clearing and longer blocks aligned with assembly/disassembly events logged as changeover time.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement preventive maintenance with scheduled inspection and replacement of wear parts (blades, pistons, seals), verify correct alignment and calibration after every reassembly, and standardize a quick-release tooling design with a documented procedure to reduce disassembly and reassembly time. Train operators to recognize early jam indicators and to clear obstructions safely without full teardown whenever possible.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Mittlere Ereignisdauer: 28,0 min · laut Bericht: “Dismantling the divider”
    Wörtliches Zitat anzeigen
    Dismantling the divider: 0:28:00
  2. Mittlere Ereignisdauer: 22,0 min · laut Bericht: “Assembly of dividers”
    Wörtliches Zitat anzeigen
    Assembly of dividers: 0:22:00
  3. Anteil an der Verlustzeit: 25,7 % · laut Bericht: “Divisor trabado”
    Wörtliches Zitat anzeigen
    los elevados tiempos de reparación y bajo tiempos entre fallas por divisor trabado representan el 25.69% del total de horas de parada por fallas en componentes e impactan únicamente en la Línea 2.
  4. Mittlere Ereignisdauer: 42,1 min · laut Bericht: “Divider”
    Wörtliches Zitat anzeigen
    Divider exhibits the highest probability of failure in the upcoming month, indicated by the most significant number of recorded breakdowns (30 incidents). The high failure frequency combined with moderate repair time (MTTR = 42.1 minutes).
  5. Anzahl der Ereignisse: 30,0 events · laut Bericht: “Divider”
    Wörtliches Zitat anzeigen
    Divider exhibits the highest probability of failure in the upcoming month, indicated by the most significant number of recorded breakdowns (30 incidents). The high failure frequency combined with moderate repair time (MTTR = 42.1 minutes).