1Bibliografische Angaben
- Autoren
- Mohammad Andi Rasyid, Tedjo Sukmono
- Jahr
- 2024
- Publikationsorgan
- Procedia of Engineering and Life Science
- Land
- Indonesia
- Segment
- Backwaren und Teigwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · — Linien · — Maschinen
- Beobachtungszeitraum
- 30 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
Perusahaan yang bergerak dalam sektor manufaktur makanan dengan hasil produksi berupa produk mi kering, mi instan dan mi bihun.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Table 4)November 98,30 87,40 97,44 83,70 | none | OEE | 83,7 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4)November 98,30 87,40 97,44 83,70 | none | Verfügbarkeit | 98,3 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4)November 98,30 87,40 97,44 83,70 | none | Leistung | 87,4 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4)November 98,30 87,40 97,44 83,70 | none | Qualität | 97,4 % | Einfache Extraktion |
Breakdown LossesWörtliches Zitat anzeigen (Section III.E.1)𝐵𝑟𝑒𝑎𝑘𝑑𝑜𝑤𝑛 𝐿𝑜𝑠𝑠𝑒𝑠= 1,704 % | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 1,70 % | Einfache Extraktion |
Setup and adjustment lossesWörtliches Zitat anzeigen (Section III.E.2)𝑆𝑒𝑡𝑢𝑝 𝑎𝑛𝑑 𝑎𝑑𝑗𝑢𝑠𝑚𝑒𝑛𝑡 𝑙𝑜𝑠𝑠𝑒𝑠= 0 % | Rüsten und Einstellen | Anteil an der geplanten Zeit | 0 % | Einfache Extraktion |
Reduced speed lossesWörtliches Zitat anzeigen (Section III.E.3)𝑅𝑒𝑑𝑢𝑐𝑒𝑑 𝑠𝑝𝑒𝑒𝑑 𝑙𝑜𝑠𝑠𝑒𝑠𝑠= 12,386 % | Verringerte Geschwindigkeit | Anteil an der geplanten Zeit | 12,4 % | Einfache Extraktion |
Idling minor stoppage lossesWörtliches Zitat anzeigen (Section III.E.4)𝐼𝑑𝑙𝑖𝑛𝑔 𝑚𝑖𝑛𝑜𝑟 𝑠𝑡𝑜𝑝𝑎𝑔𝑒 𝑙𝑜𝑠𝑠𝑒𝑠= 2,353 % | Leerlauf und Kurzstillstände | Anteil an der geplanten Zeit | 2,35 % | Einfache Extraktion |
Defect in processWörtliches Zitat anzeigen (Section III.E.5)𝐷𝑒𝑓𝑒𝑐𝑡 𝑖𝑛 𝑝𝑟𝑜𝑐𝑒𝑠𝑠= 2,202 % | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der geplanten Zeit | 2,20 % | Einfache Extraktion |
Reduced yield lossesWörtliches Zitat anzeigen (Section III.E.6)𝑅𝑒𝑑𝑢𝑐𝑒𝑑 𝑦𝑖𝑒𝑙𝑑 𝑙𝑜𝑠𝑠𝑒𝑠= 0 % | Anlaufverluste (verminderte Ausbeute) | Anteil an der geplanten Zeit | 0 % | Einfache Extraktion |
Beobachtungseinheiten
- Mesin produksi (production machine, November) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage

