Eingeschlossene Studie
USULAN PENINGKATAN EFEKTIVITAS MESIN CETAK MANUAL MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) (STUDI KASUS DI PERUSAHAAN KERUPUK TTN)
1Bibliografische Angaben
- Autoren
- Delia Fitri Rahmadhani, Harsono Taroepratjeka, Lisye Fitria
- Jahr
- 2014
- Publikationsorgan
- REKA INTEGRA
- DOI
- —
- Land
- Indonesia
- Segment
- Snacks, Kaffee, Tee und sonstige Lebensmittel
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- 30 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
Perusahaan Kerupuk TTN adalah salah satu perusahaan kerupuk di Kota Bandung.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—mesin cetak manualWörtliches Zitat anzeigen (Table 3)Total 240000 4246 98,231 | none | Qualität | 98,2 % | Beide Extraktionen übereinstimmend |
—mesin cetak manualWörtliches Zitat anzeigen (Table 2)Total 4050 235754 85.604 | none | Leistung | 85,6 % | Beide Extraktionen übereinstimmend |
—mesin cetak manualWörtliches Zitat anzeigen (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | none | Verfügbarkeit | 73,6 % | Beide Extraktionen übereinstimmend |
—mesin cetak manualWörtliches Zitat anzeigen (Section 5 Analisis / Table 4)Dari hasil perhitungan yang telah dilakukan, didapatkan rata-rata nilai OEE untuk bulan April 2014 adalah sebesar 61,920%. | none | OEE | 61,9 % | Beide Extraktionen übereinstimmend |
Equipment Failure Lossesmesin cetak manualWörtliches Zitat anzeigen (Section 4.5, point 1)= 1942 10200 𝑥 100% = 19,039% | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 19,0 % | Einfache Extraktion |
Setup and Adjustment Lossesmesin cetak manualWörtliches Zitat anzeigen (Section 4.5, point 2)= 750 10200 𝑥 100% = 7,353 | Rüsten und Einstellen | Anteil an der geplanten Zeit | 7,35 % | Einfache Extraktion |
Idle and Minor Stoppage Lossesmesin cetak manualWörtliches Zitat anzeigen (Section 4.5, point 3)= (240000−235754)𝑥 0,015 10200 = 0,573% | Leerlauf und Kurzstillstände | Anteil an der geplanten Zeit | 0,573 % | Einfache Extraktion |
Reduce Speed Lossesmesin cetak manualWörtliches Zitat anzeigen (Section 4.5, point 4)= (0,032 −0,015)𝑥 235754 10200 𝑥 100% = 39,292% | Verringerte Geschwindigkeit | Anteil an der geplanten Zeit | 39,3 % | Einfache Extraktion |
Defect Lossesmesin cetak manualWörtliches Zitat anzeigen (Section 4.5, point 5)= 4246 𝑥 0,015 10200 𝑥 100% = 0,624% | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der geplanten Zeit | 0,624 % | Einfache Extraktion |
—mesin cetak manualWörtliches Zitat anzeigen (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Anlagenausfall (Störungen) | Verlustzeit | 1.942 min | Einfache Extraktion |
—mesin cetak manualWörtliches Zitat anzeigen (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Rüsten und Einstellen | Verlustzeit | 750 min | Einfache Extraktion |
—mesin cetak manualWörtliches Zitat anzeigen (Table 1)Total 10800 600 10200 1942 750 7508 73,608 | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 600 min | Einfache Extraktion |
Beobachtungseinheiten
- Mesin Cetak Manual · Formen, Gießen und Dosieren · Ausgangslage

