Eingeschlossene Studie
Implementação de metodologias Lean numa linha de enchimento de bebidas
1Bibliografische Angaben
- Autoren
- Graça Maria Soares Pereira
- Jahr
- 2018
- Publikationsorgan
- Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
- Land
- Portugal
- Segment
- Bier, Wein und Spirituosen
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 2 Maschinen
- Beobachtungszeitraum
- 1.095 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
A linha nº 5 é a de maior dimensão e tem uma capacidade homologada de produção de aproximadamente 80000 garrafas/hora, valor esse que corresponde à soma das capacidades de cada enchedora.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 13Geringes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)descida de OEE (Overall Equipment Efficency), de 72,41% para 61,92%; | none | OEE | 72,4 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)descida de OEE (Overall Equipment Efficency), de 72,41% para 61,92%; | none | OEE | 61,9 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TD (tempo degradado), de 5,44% para 12,71%; | Aus dem Bericht nicht klassifizierbar | Anteil an der geplanten Zeit | 5,44 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TD (tempo degradado), de 5,44% para 12,71%; | Aus dem Bericht nicht klassifizierbar | Anteil an der geplanten Zeit | 12,7 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TAV (tempo de avarias), de 8,8% para 12,85%; | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 8,80 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TAV (tempo de avarias), de 8,8% para 12,85%; | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 12,9 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TMP (tempo de mudança de produto), de 1,40% para 3.01%; | Rüsten und Einstellen | Anteil an der geplanten Zeit | 1,40 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento do TMP (tempo de mudança de produto), de 1,40% para 3.01%; | Rüsten und Einstellen | Anteil an der geplanten Zeit | 3,01 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento de REX (razões externas), de 2,75% para 4,60%. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an der geplanten Zeit | 2,75 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.1 / Figure 9)aumento de REX (razões externas), de 2,75% para 4,60%. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an der geplanten Zeit | 4,60 % | Einfache Extraktion |
Mudar e transportar peças de formatoenchedoraWörtliches Zitat anzeigen (Table 5)7, 8, 11, 12 Mudar e transportar peças de formato 38 20 | Rüsten und Einstellen | Verlustzeit | 38,0 min | Einfache Extraktion |
Instruções ao operador BWörtliches Zitat anzeigen (Table 5)9 Instruções ao operador B 2 0 | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Empurrar garrafas no pasteurizadorpasteurizadorWörtliches Zitat anzeigen (Table 5)10 Empurrar garrafas no pasteurizador 6 0 | Rüsten und Einstellen | Verlustzeit | 6,00 min | Einfache Extraktion |
AjustesenchedoraWörtliches Zitat anzeigen (Table 5)16 Ajustes 14 4 | Rüsten und Einstellen | Verlustzeit | 14,0 min | Einfache Extraktion |
Procurar ferramentaWörtliches Zitat anzeigen (Table 5)18 Procurar ferramenta 13 0 | Rüsten und Einstellen | Verlustzeit | 13,0 min | Einfache Extraktion |
Apertar fixação da capsuladoracapsuladoraWörtliches Zitat anzeigen (Table 5)19 Apertar fixação da capsuladora 3 1 | Rüsten und Einstellen | Verlustzeit | 3,00 min | Einfache Extraktion |
Esperar por garrafasWörtliches Zitat anzeigen (Table 5)20 Esperar por garrafas 10 0 | Rüsten und Einstellen | Verlustzeit | 10,0 min | Einfache Extraktion |
Testar enchimentoenchedoraWörtliches Zitat anzeigen (Table 5)21 Testar enchimento 5 0 | Rüsten und Einstellen | Verlustzeit | 5,00 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 5)Tempo total (min) 91 25 | Rüsten und Einstellen | Verlustzeit | 91,0 min | Einfache Extraktion |
Mudar e transportar guias da capsuladoracapsuladoraWörtliches Zitat anzeigen (Table 10)8, 15, 19 Mudar e transportar guias da capsuladora 15 6 | Rüsten und Einstellen | Verlustzeit | 15,0 min | Einfache Extraktion |
Mudar e transportar pistões de capsulagemcapsuladoraWörtliches Zitat anzeigen (Table 10)9, 12 Mudar e transportar pistões de capsulagem 43 20 | Rüsten und Einstellen | Verlustzeit | 43,0 min | Einfache Extraktion |
Trazer a mangueira para junto da enchedoraenchedoraWörtliches Zitat anzeigen (Table 10)10 Trazer a mangueira para junto da enchedora 1 0 | Rüsten und Einstellen | Verlustzeit | 1,00 min | Einfache Extraktion |
Trazer carro para mais junto das enchedorasWörtliches Zitat anzeigen (Table 10)11, 13 Trazer carro para mais junto das enchedoras 13 1 | Rüsten und Einstellen | Verlustzeit | 13,0 min | Einfache Extraktion |
Resolução de parafuso moído no pistãocapsuladoraWörtliches Zitat anzeigen (Table 10)14, 16 Resolução de parafuso moído no pistão 57 0 | Rüsten und Einstellen | Verlustzeit | 57,0 min | Einfache Extraktion |
Retirar pistão que o operador B se enganou a montarcapsuladoraWörtliches Zitat anzeigen (Table 10)17 Retirar pistão que o operador B se enganou a montar 2 0 | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 10)Tempo total (min) 131 27 | Rüsten und Einstellen | Verlustzeit | 131 min | Einfache Extraktion |
Mudança de taraenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de tara 102,5 min 42 min 60,5 min 1,07% | Rüsten und Einstellen | Mittlere Ereignisdauer | 103 min | Einfache Extraktion |
Mudança de cápsulaenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de cápsula 118,4 min 55 min 63,4 min | Rüsten und Einstellen | Mittlere Ereignisdauer | 118 min | Einfache Extraktion |
Mudança de tara e cápsulaenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de tara e cápsula 151,8 min 84 min 67,8 min | Rüsten und Einstellen | Mittlere Ereignisdauer | 152 min | Einfache Extraktion |
Mudança de tara (trabalho interno)enchedoraWörtliches Zitat anzeigen (Section 4.5.1)A média da duração de trabalho interno das mudanças de tara observadas é de 115 minutos. | Rüsten und Einstellen | Mittlere Ereignisdauer | 115 min | Einfache Extraktion |
Mudança de cápsula (trabalho interno)enchedoraWörtliches Zitat anzeigen (Section 4.5.2)A média da duração de trabalho interno das mudanças de cápsula observadas é de 100 minutos. | Rüsten und Einstellen | Mittlere Ereignisdauer | 100 min | Einfache Extraktion |
Mudar e transportar peças de formatoenchedoraWörtliches Zitat anzeigen (Table 5)7, 8, 11, 12 Mudar e transportar peças de formato 38 20 | Rüsten und Einstellen | Verlustzeit | 20,0 min | Einfache Extraktion |
Instruções ao operador BWörtliches Zitat anzeigen (Table 5)9 Instruções ao operador B 2 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
Empurrar garrafas no pasteurizadorpasteurizadorWörtliches Zitat anzeigen (Table 5)10 Empurrar garrafas no pasteurizador 6 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
AjustesenchedoraWörtliches Zitat anzeigen (Table 5)16 Ajustes 14 4 | Rüsten und Einstellen | Verlustzeit | 4,00 min | Einfache Extraktion |
Procurar ferramentaWörtliches Zitat anzeigen (Table 5)18 Procurar ferramenta 13 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
Apertar fixação da capsuladoracapsuladoraWörtliches Zitat anzeigen (Table 5)19 Apertar fixação da capsuladora 3 1 | Rüsten und Einstellen | Verlustzeit | 1,00 min | Einfache Extraktion |
Esperar por garrafasWörtliches Zitat anzeigen (Table 5)20 Esperar por garrafas 10 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
Testar enchimentoenchedoraWörtliches Zitat anzeigen (Table 5)21 Testar enchimento 5 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 5)Tempo total (min) 91 25 | Rüsten und Einstellen | Verlustzeit | 25,0 min | Einfache Extraktion |
Mudar e transportar guias da capsuladoracapsuladoraWörtliches Zitat anzeigen (Table 10)8, 15, 19 Mudar e transportar guias da capsuladora 15 6 | Rüsten und Einstellen | Verlustzeit | 6,00 min | Einfache Extraktion |
Mudar e transportar pistões de capsulagemcapsuladoraWörtliches Zitat anzeigen (Table 10)9, 12 Mudar e transportar pistões de capsulagem 43 20 | Rüsten und Einstellen | Verlustzeit | 20,0 min | Einfache Extraktion |
Trazer a mangueira para junto da enchedoraenchedoraWörtliches Zitat anzeigen (Table 10)10 Trazer a mangueira para junto da enchedora 1 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
Trazer carro para mais junto das enchedorasWörtliches Zitat anzeigen (Table 10)11, 13 Trazer carro para mais junto das enchedoras 13 1 | Rüsten und Einstellen | Verlustzeit | 1,00 min | Einfache Extraktion |
Resolução de parafuso moído no pistãocapsuladoraWörtliches Zitat anzeigen (Table 10)14, 16 Resolução de parafuso moído no pistão 57 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
Retirar pistão que o operador B se enganou a montarcapsuladoraWörtliches Zitat anzeigen (Table 10)17 Retirar pistão que o operador B se enganou a montar 2 0 | Rüsten und Einstellen | Verlustzeit | 0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 10)Tempo total (min) 131 27 | Rüsten und Einstellen | Verlustzeit | 27,0 min | Einfache Extraktion |
Mudança de taraenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de tara 102,5 min 42 min 60,5 min 1,07% | Rüsten und Einstellen | Mittlere Ereignisdauer | 42,0 min | Einfache Extraktion |
Mudança de cápsulaenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de cápsula 118,4 min 55 min 63,4 min | Rüsten und Einstellen | Mittlere Ereignisdauer | 55,0 min | Einfache Extraktion |
Mudança de tara e cápsulaenchedoraWörtliches Zitat anzeigen (Table 12)Mudança de tara e cápsula 151,8 min 84 min 67,8 min | Rüsten und Einstellen | Mittlere Ereignisdauer | 84,0 min | Einfache Extraktion |
Mudança de tara (trabalho interno)enchedoraWörtliches Zitat anzeigen (Section 4.5.1)O diagrama de Gantt (Anexo E) indica que o trabalho interno de uma mudança de tara pode ser executado em 30 minutos e que, no total, o tempo requerido para a mudança de tara são 42 minutos. | Rüsten und Einstellen | Mittlere Ereignisdauer | 30,0 min | Einfache Extraktion |
Mudança de cápsula (trabalho interno)enchedoraWörtliches Zitat anzeigen (Section 4.5.2)O diagrama indica que o trabalho interno de uma mudança de cápsula pode ser executado em 44 minutos e que, no total, o tempo requerido para a mudança de tara são 55 minutos. | Rüsten und Einstellen | Mittlere Ereignisdauer | 44,0 min | Einfache Extraktion |
Mudança de tara e cápsula (trabalho interno)enchedoraWörtliches Zitat anzeigen (Section 4.5.3)O diagrama indica que o trabalho interno de uma mudança de tara e cápsula pode ser executado em 69 minutos e que, no total, o tempo requerido para a mudança de tara e cápsula são 84 minutos | Rüsten und Einstellen | Mittlere Ereignisdauer | 69,0 min | Einfache Extraktion |
Bottle size changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente | Rüsten und Einstellen | Verlustzeit | 103 min | Einfache Extraktion |
Capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente | Rüsten und Einstellen | Verlustzeit | 119 min | Einfache Extraktion |
Bottle size and capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente | Rüsten und Einstellen | Verlustzeit | 152 min | Einfache Extraktion |
Bottle size changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.1, Identificação dos tipos de mudança críticos, page 23)as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente | Rüsten und Einstellen | Anteil an der Verlustzeit | 23,8 % | Einfache Extraktion |
Capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.1, Identificação dos tipos de mudança críticos, page 23)as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente | Rüsten und Einstellen | Anteil an der Verlustzeit | 23,7 % | Einfache Extraktion |
Bottle size and capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.1, Identificação dos tipos de mudança críticos, page 23)as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente | Rüsten und Einstellen | Anteil an der Verlustzeit | 16,7 % | Einfache Extraktion |
Bottle size changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6) | Rüsten und Einstellen | Verlustzeit | 42,0 min | Einfache Extraktion |
Capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6) | Rüsten und Einstellen | Verlustzeit | 55,0 min | Einfache Extraktion |
Bottle size and capsule type changeoverEnchedoras (Fillers)Wörtliches Zitat anzeigen (Section 4.7, Quantificação das melhorias desenvolvidas, page 44)Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6) | Rüsten und Einstellen | Verlustzeit | 84,0 min | Einfache Extraktion |
Beobachtungseinheiten
- Linha 5 (whole filling line) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Enchedoras (two fillers, Line 5) · Abfüllen · Ausgangslage
- Enchedoras (two fillers, Line 5) · Abfüllen · Nach der Intervention
- Line 5 - Fillers (Enchedoras) · Abfüllen · Ausgangslage
- Line 5 - Fillers (Enchedoras) · Abfüllen · Nach der Intervention

