Eingeschlossene Studie
Reliability-Centered Maintenance Model to Improve OEE in a Mass-Consumption Food Company: A Case Study from Peru
1Bibliografische Angaben
- Autoren
- Sebastian Enrique Maceda-Cabrejo, Mauricio Ivan Velazco-Gomez, Richard Nicholas Meza-Ortiz
- Jahr
- 2025
- Publikationsorgan
- International Journal of Industrial Engineering
- Land
- Peru
- Segment
- Backwaren und Teigwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 20 Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- maintenance_records
- Intervention
Umfeld laut Studie anzeigen
The diagnosis conducted in the case study identified the central problem as a low Overall Equipment Effectiveness (OEE) in the filled cookie production line, with an initial level of only 57.93%, revealing a technical gap in relation to the target of 80%.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Table 4)Production Line Performance Rate % 77.74% 90% 86.14% 10.81% | none | Leistung | 77,7 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 4)Defective Product Rate % 2.04% 1% 1.21% -40.69% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 2,04 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 4)OEE % 57.93% 80% 75.67% 30.62% | none | OEE | 57,9 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 4)Production Line Performance Rate % 77.74% 90% 86.14% 10.81% | none | Leistung | 86,1 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 4)Defective Product Rate % 2.04% 1% 1.21% -40.69% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,21 % | Beide Extraktionen übereinstimmend |
Failure Downtime RateWörtliches Zitat anzeigen (Table 4)Failure Downtime Rate % 23.53% 12% 13.86% -41.10% | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 23,5 % | Einfache Extraktion |
production line stoppagesWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)The analysis revealed three main reasons contributing to this issue: production line stoppages accounted for 49.2% of the problem, followed by low operational performance with a contribution of 46.5%, and a smaller share of 4.3% attributed to defective products. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 49,2 % | Einfache Extraktion |
low operational performanceWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)The analysis revealed three main reasons contributing to this issue: production line stoppages accounted for 49.2% of the problem, followed by low operational performance with a contribution of 46.5%, and a smaller share of 4.3% attributed to defective products. | Verringerte Geschwindigkeit | Anteil an der Verlustzeit | 46,5 % | Einfache Extraktion |
defective productsWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)The analysis revealed three main reasons contributing to this issue: production line stoppages accounted for 49.2% of the problem, followed by low operational performance with a contribution of 46.5%, and a smaller share of 4.3% attributed to defective products. | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 4,30 % | Einfache Extraktion |
mechanical and electrical failuresWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)These reasons were linked to specific root causes: mechanical and electrical failures explained 30.2% of the stoppages, while instrumentation faults represented 19%. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 30,2 % | Einfache Extraktion |
instrumentation faultsWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)These reasons were linked to specific root causes: mechanical and electrical failures explained 30.2% of the stoppages, while instrumentation faults represented 19%. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 19,0 % | Einfache Extraktion |
improper adjustment of the sealing systemsealing systemWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Additionally, 46.5% of the low performance was due to improper adjustment of the sealing system, and the presence of defective products was associated with wear on the magazine chain of the primary packaging machine, accounting for 4.3%. | Verringerte Geschwindigkeit | Anteil an der Verlustzeit | 46,5 % | Einfache Extraktion |
wear on the magazine chain of the primary packaging machineprimary packaging machineWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Additionally, 46.5% of the low performance was due to improper adjustment of the sealing system, and the presence of defective products was associated with wear on the magazine chain of the primary packaging machine, accounting for 4.3%. | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 4,30 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 6 Conclusion)The implementation yielded meaningful operational gains, including a 20.7% reduction in production line downtime and a notable improvement in OEE from 45.6% to 65.5%. | none | OEE | 45,6 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4)OEE % 57.93% 80% 75.67% 30.62% | none | OEE | 75,7 % | Einfache Extraktion |
Failure Downtime RateWörtliches Zitat anzeigen (Table 4)Failure Downtime Rate % 23.53% 12% 13.86% -41.10% | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 13,9 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 6 Conclusion)The implementation yielded meaningful operational gains, including a 20.7% reduction in production line downtime and a notable improvement in OEE from 45.6% to 65.5%. | none | OEE | 65,5 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4, page 8)Failure Downtime Rate % 23.53% | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 23,5 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4, page 8)Failure Downtime Rate % 13.86% | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 13,9 % | Einfache Extraktion |
Beobachtungseinheiten
- Filled cookie production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Filled cookie production line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

