Eingeschlossene Studie
Proposal to Improve the Operational Availability of the Canning Machine in a Craft Brewery through the Application of Work Study, SMED, and Planned Maintenance
1Bibliografische Angaben
- Autoren
- Evelin Josefina Suarez Montes, Maria Grazia Ximena Ascaño Arce
- Jahr
- 2026
- Publikationsorgan
- Repositorio Académico UPC (Universidad Peruana de Ciencias Aplicadas)
- DOI
- —
- Land
- Peru
- Segment
- Bier, Wein und Spirituosen
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · — Linien · 1 Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
The objective of this study was to increase the operational availability of the canning machine in a craft brewery, as it exhibited an average availability of 78%, which was below the target standard of 85%, thereby affecting the continuity of the packaging process and the company's profitability.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
electrical failurecanning machineWörtliches Zitat anzeigen (Abstract)Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 171 h | Beide Extraktionen übereinstimmend |
mechanical failurecanning machineWörtliches Zitat anzeigen (Abstract)Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 117 h | Beide Extraktionen übereinstimmend |
electrical failurecanning machineWörtliches Zitat anzeigen (Abstract)the electrical MTTR decreased from 7.20 h to 5.17 h | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 5,17 h | Beide Extraktionen übereinstimmend |
mechanical failurecanning machineWörtliches Zitat anzeigen (Abstract)the mechanical MTTR decreased from 9.73 h to 7.50 h | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 7,50 h | Beide Extraktionen übereinstimmend |
preventive maintenancecanning machineWörtliches Zitat anzeigen (Abstract)the preventive maintenance MTTR decreased from 3.38 h to 2.38 h | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Mittlere Ereignisdauer | 2,38 h | Beide Extraktionen übereinstimmend |
—canning machineWörtliches Zitat anzeigen (Abstract)Operational availability increased from 78% to 82.75%, the preventive maintenance MTTR decreased from 3.38 h to 2.38 h, the average setup time was reduced from 7.25 h to 5.50 h, the mechanical MTTR decreased from 9.73 h to 7.50 h, and the electrical MTTR decreased from 7.20 h to 5.17 h. | none | Verfügbarkeit | 82,8 % | Beide Extraktionen übereinstimmend |
electrical failurecanning machineWörtliches Zitat anzeigen (Abstract)Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 144 h | Beide Extraktionen übereinstimmend |
mechanical failurecanning machineWörtliches Zitat anzeigen (Abstract)Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 98,7 h | Beide Extraktionen übereinstimmend |
electrical failurecanning machineWörtliches Zitat anzeigen (Abstract)the electrical MTTR decreased from 7.20 h to 5.17 h | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 7,20 h | Beide Extraktionen übereinstimmend |
mechanical failurecanning machineWörtliches Zitat anzeigen (Abstract)the mechanical MTTR decreased from 9.73 h to 7.50 h | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 9,73 h | Beide Extraktionen übereinstimmend |
preventive maintenancecanning machineWörtliches Zitat anzeigen (Abstract)the preventive maintenance MTTR decreased from 3.38 h to 2.38 h | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Mittlere Ereignisdauer | 3,38 h | Beide Extraktionen übereinstimmend |
—canning machineWörtliches Zitat anzeigen (Abstract)Operational availability increased from 78% to 82.75%, the preventive maintenance MTTR decreased from 3.38 h to 2.38 h, the average setup time was reduced from 7.25 h to 5.50 h, the mechanical MTTR decreased from 9.73 h to 7.50 h, and the electrical MTTR decreased from 7.20 h to 5.17 h. | none | Verfügbarkeit | 78,0 % | Beide Extraktionen übereinstimmend |
setupcanning machineWörtliches Zitat anzeigen (Abstract)the average setup time was reduced from 7.25 h to 5.50 h | Rüsten und Einstellen | Mittlere Ereignisdauer | 5,50 h | Beide Extraktionen übereinstimmend |
setupcanning machineWörtliches Zitat anzeigen (Abstract)the average setup time was reduced from 7.25 h to 5.50 h | Rüsten und Einstellen | Mittlere Ereignisdauer | 7,25 h | Beide Extraktionen übereinstimmend |
Beobachtungseinheiten
- Canning machine · Abfüllen · Nach der Intervention
- Canning machine · Abfüllen · Ausgangslage

