Eingeschlossene Studie
Improving Production Efficiency in a Chocolate SME through Continuous Flow, SMED and Poka-Yoke
1Bibliografische Angaben
- Autoren
- Camila Panta-Mejia, Katya Pino-Ore, Gino Viacava-Campos, Jorge Antonio Corzo-Chávez
- Jahr
- 2026
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Zucker und Süßwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- 35 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
Artisanal plants continue to face recurring failures such as thermal variability during tempering, inaccurate filling of buffer tanks, reprocessing in molding, and excessive changeover times that compromise product quality and restrict productive capacity.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
operational interruptions during mold changeovermoldWörtliches Zitat anzeigen (Section 5.1, Improvement 1)As-Is interruptions: 10 per week → 1 per week | Rüsten und Einstellen | Anzahl der Ereignisse | 10,0 events/week | Beide Extraktionen übereinstimmend |
manual chocolate transferbuffer tank / transfer lineWörtliches Zitat anzeigen (Section 5.1, Improvement 2)Problem addressed: 180-minute manual transfer, temperature fluctuations, risk of spills, and WIP accumulation. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 180 min | Durch Schiedsentscheid |
—Wörtliches Zitat anzeigen (Abstract)The plant analyzed in this study operates at only 39.28% real efficiency, evidencing structural gaps in flow synchronization, standardization, and control of critical variables. | none | OEE | 39,3 % | Beide Extraktionen übereinstimmend |
operational interruptions during mold changeovermoldWörtliches Zitat anzeigen (Section 5.2 (Operational records and timing, 5 weeks))Week 5: 1 interruption | Rüsten und Einstellen | Anzahl der Ereignisse | 1,00 events/week | Beide Extraktionen übereinstimmend |
overfillingbuffer tankWörtliches Zitat anzeigen (Section 5.1, Improvement 3)Overfilling: 40% → 6% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 40,0 % | Beide Extraktionen übereinstimmend |
operational interruptions during mold changeovermoldWörtliches Zitat anzeigen (Section 5.2 (Operational records and timing, 5 weeks))Week 1: 5 interruptions | Rüsten und Einstellen | Anzahl der Ereignisse | 5,00 events/week | Einfache Extraktion |
operational interruptions during mold changeovermoldWörtliches Zitat anzeigen (Figure 8 caption)Weeks 2, 3, and 4 stabilized at three interruptions each, showing improved workflow continuity and reduced operational stops. | Rüsten und Einstellen | Anzahl der Ereignisse | 3,00 events/week | Einfache Extraktion |
reprocessingbuffer tank / moldingWörtliches Zitat anzeigen (Section 5.1, Improvement 3)Reprocessing: 25% → 5% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 25,0 % | Einfache Extraktion |
overfillingbuffer tankWörtliches Zitat anzeigen (Section 5.1, Improvement 3)Overfilling: 40% → 6% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 6,00 % | Einfache Extraktion |
reprocessingbuffer tank / moldingWörtliches Zitat anzeigen (Section 5.1, Improvement 3)Reprocessing: 25% → 5% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 5,00 % | Einfache Extraktion |
thermal variability during tempering, inaccurate fillingWörtliches Zitat anzeigen (Table 2, page 217)Reprocessing overall | 25% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 25,0 % | Einfache Extraktion |
reduced thermal variability, improved filling controlWörtliches Zitat anzeigen (Table 2, page 217)Reprocessing overall | 5% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 5,00 % | Einfache Extraktion |
Beobachtungseinheiten
- Mold changeover (SMED) · Formen, Gießen und Dosieren · Ausgangslage
- Chocolate production line (whole process) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Mold changeover (SMED) · Formen, Gießen und Dosieren · Nach der Intervention
- Buffer tank (tempering buffer) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Buffer tank (tempering buffer) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Chocolate Production Plant · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Chocolate Production Plant · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

