foratvise
Get Started
Equipment failure (breakdowns)

Product leakage/spillage from bulk material conveying equipment

Equipment failure (breakdowns)AvailabilityConveying and accumulation

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 86 studies that could observe it (sparse evidence).

What happens

Worn or damaged components of bulk handling equipment such as bucket elevators, belt conveyors and screw/auger conveyors (loose buckets, worn flighting, misaligned belts, degraded seals at transfer points and housings) allow granular or powdery product to leak, spill or escape from the transport path. The resulting material loss and associated mechanical malfunction eventually force an unplanned stop for repair or adjustment.

What is done about it

Implement a preventive maintenance program covering inspection and replacement of buckets, belts, flighting and seals, correct tensioning and alignment, and improved containment (covers, drip trays, dust skirts) at transfer and loading points. Install or verify spillage/level detection to trigger early intervention before a failure stop occurs.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
58% [46–68%]
Studies / units
86 / 112
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–2.8%]11 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.3%]28 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.7%]12 studies
  • Bakery and pasta
    0.8% [0.1–3.2%]0 studies
  • Meat, poultry and seafood
    0.8% [0.1–3.1%]5 studies
  • Fruit and vegetable processing
    0.8% [0.1–2.9%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–3.2%]4 studies
  • Sugar and confectionery
    0.8% [0.1–3.2%]4 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.9%]4 studies
  • Animal feed and pet food
    1.2% [0.1–4.4%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–3.0%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Worn or damaged components of bulk handling equipment such as bucket elevators, belt conveyors and screw/auger conveyors (loose buckets, worn flighting, misaligned belts, degraded seals at transfer points and housings) allow granular or powdery product to leak, spill or escape from the transport path. The resulting material loss and associated mechanical malfunction eventually force an unplanned stop for repair or adjustment.

How it looks in SCADA data

Engineering guidance

Unplanned stop events logged against the specific elevator or conveyor asset, often preceded by motor current/torque fluctuations or overload trips as material builds up or spills onto moving parts. Level or mass-balance discrepancies between upstream and downstream storage/weighing points, and recurring short-duration fault alarms tied to the same equipment tag, are typical indicators.

Countermeasure

Engineering guidance

Implement a preventive maintenance program covering inspection and replacement of buckets, belts, flighting and seals, correct tensioning and alignment, and improved containment (covers, drip trays, dust skirts) at transfer and loading points. Install or verify spillage/level detection to trigger early intervention before a failure stop occurs.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 10.0 Kg.h-1 · as reported: “Product loss in soybean meal transport equipment”
    Show verbatim quote
    Equipments Soybean meals 10.000 ± 2.462 Kg
  2. Lost time: 17.2 Kg.h-1 · as reported: “Product loss in feed production transport equipment”
    Show verbatim quote
    Equipments Feed production 17.222 ± 4.114 Kg