foratvise
Get Started
Process defects (scrap and rework)

Color deviation defect

Process defects (scrap and rework)QualityMixing and blending

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 31 studies that could observe it (sparse evidence).

What happens

Inconsistent dosing, blending time, ingredient quality or pigment/colorant concentration during mixing causes the finished product color to fall outside the accepted specification band. This can also stem from batch-to-batch raw material variability or incomplete homogenization of colorants within the mix.

What is done about it

Tighten incoming raw material and colorant specification checks, calibrate dosing systems regularly, and standardize mixing time and agitation profile per recipe; implement in-line color measurement with automatic feedback adjustment to the dosing system.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.8%]
Expected share of lost time
0.4% [0.1–1.4%]
Share of lost time when present
48% [36–60%]
Studies / units
31 / 40
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.6% [0.1–6.5%]6 studies
  • Soft drinks, bottled water and juices
    1.1% [0.1–4.0%]2 studies
  • Brewing, wine and spirits
    1.1% [0.1–4.4%]0 studies
  • Bakery and pasta
    1.0% [0.1–4.2%]2 studies
  • Meat, poultry and seafood
    1.1% [0.1–4.4%]1 study
  • Fruit and vegetable processing
    1.1% [0.1–4.3%]2 studies
  • Grain and oilseed milling
    1.1% [0.1–4.3%]0 studies
  • Sugar and confectionery
    1.1% [0.1–4.3%]3 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–4.0%]3 studies
  • Animal feed and pet food
    1.0% [0.1–4.0%]5 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–3.9%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Inconsistent dosing, blending time, ingredient quality or pigment/colorant concentration during mixing causes the finished product color to fall outside the accepted specification band. This can also stem from batch-to-batch raw material variability or incomplete homogenization of colorants within the mix.

How it looks in SCADA data

Engineering guidance

Quality or vision-inspection stations log out-of-spec color readings (e.g. colorimeter or camera deviation from setpoint) correlated with specific batch or mixer records, while mixer run time, agitator speed and dosing pump totals remain within normal ranges, pointing to a formulation or raw-material issue rather than an equipment stop.

Countermeasure

Engineering guidance

Tighten incoming raw material and colorant specification checks, calibrate dosing systems regularly, and standardize mixing time and agitation profile per recipe; implement in-line color measurement with automatic feedback adjustment to the dosing system.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 29.7 Ton · as reported: “Desviación de color”
    Show verbatim quote
    y en cuanto a desviación de Color de 32.3 a 29.7 toneladas un beneficio de 8.1%
  2. Lost time: 32.3 Ton · as reported: “Desviación de color”
    Show verbatim quote
    y en cuanto a desviación de Color de 32.3 a 29.7 toneladas un beneficio de 8.1%