Cooking equipment start-up and warm-up
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 57 studies that could observe it (sparse evidence).
What happens
Before processing can begin, the industrial cooking equipment must be switched on and allowed to reach its stable operating temperature and conditions, which requires a warm-up period during which no saleable product is being processed. This time is organizationally necessary but adds to the changeover or start-of-run duration of the line.
What is done about it
Schedule equipment ignition and pre-heating ahead of the planned start time so that operating temperature is reached concurrently with other setup tasks, and maintain standby heat retention between runs where feasible to shorten subsequent warm-up cycles.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.4%]
- Expected share of lost time
- 0.2% [0.0–0.8%]
- Share of lost time when present
- 57% [45–67%]
- Studies / units
- 57 / 69
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.5% [0.0–2.0%]5 studies
- Soft drinks, bottled water and juices0.5% [0.0–2.3%]1 study
- Brewing, wine and spirits0.5% [0.0–2.2%]0 studies
- Bakery and pasta0.5% [0.0–1.9%]24 studies
- Meat, poultry and seafood0.5% [0.0–2.3%]2 studies
- Fruit and vegetable processing0.5% [0.0–2.2%]2 studies
- Grain and oilseed milling0.5% [0.0–2.4%]0 studies
- Sugar and confectionery0.5% [0.0–2.0%]8 studies
- Snacks, coffee, tea and other foods0.5% [0.0–2.0%]4 studies
- Animal feed and pet food0.5% [0.0–2.2%]4 studies
- Food manufacturing (unspecified or mixed)0.5% [0.0–2.2%]7 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceBefore processing can begin, the industrial cooking equipment must be switched on and allowed to reach its stable operating temperature and conditions, which requires a warm-up period during which no saleable product is being processed. This time is organizationally necessary but adds to the changeover or start-of-run duration of the line.
How it looks in SCADA data
Engineering guidanceMachine state logs show an extended heating or warm-up state prior to the running state, with temperature or burner signals ramping toward setpoint while production counters remain at zero. No alarms are typically raised, but the duration between power-on and first-unit timestamps lengthens the recorded changeover window.
Countermeasure
Engineering guidanceSchedule equipment ignition and pre-heating ahead of the planned start time so that operating temperature is reached concurrently with other setup tasks, and maintain standby heat retention between runs where feasible to shorten subsequent warm-up cycles.
4Sources
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Open sourceLost time: 680 s · as reported: “Encender y procesar con la cocina industrial”
Show verbatim quote
Encender y procesar con la cocina industrial 679, 6
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Open sourceLost time: 130 s · as reported: “Open steam valve to cooker”
Show verbatim quote
25 Aperturar llave de vapor al cocinador 129,8 X

