foratvise
Get Started
Process defects (scrap and rework)

Depanning Product Damage

Process defects (scrap and rework)QualityBaking

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 49 % of the line's lost time. Reported by 1 of the 60 studies that could observe it (sparse evidence).

What happens

Baked product adheres to the pan or mould surface due to insufficient release agent, pan wear, or an unsuitable baking profile, so when the depanner inverts, vacuum-lifts or mechanically ejects the unit it tears, deforms or leaves fragments stuck to the pan. The resulting units show broken edges, torn crust, or missing mass and no longer meet specification.

What is done about it

Maintain pan condition and release-agent application, adjust baking temperature and time profile to ensure proper crust set before depanning, and calibrate the depanner's vacuum, inversion or gripper settings to the product and pan type.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.1–2.2%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
49% [38–61%]
Studies / units
60 / 73
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.4%]5 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–3.4%]1 study
  • Brewing, wine and spirits
    0.9% [0.1–3.8%]0 studies
  • Bakery and pasta
    1.1% [0.1–3.4%]27 studies
  • Meat, poultry and seafood
    0.9% [0.1–3.6%]2 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.6%]2 studies
  • Grain and oilseed milling
    0.9% [0.1–3.5%]0 studies
  • Sugar and confectionery
    0.9% [0.1–3.1%]8 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.5%]4 studies
  • Animal feed and pet food
    0.9% [0.1–3.6%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.5%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Baked product adheres to the pan or mould surface due to insufficient release agent, pan wear, or an unsuitable baking profile, so when the depanner inverts, vacuum-lifts or mechanically ejects the unit it tears, deforms or leaves fragments stuck to the pan. The resulting units show broken edges, torn crust, or missing mass and no longer meet specification.

How it looks in SCADA data

Engineering guidance

MES/quality data show an elevated rate of rejected or downgraded units recorded immediately after the depanner station, often correlated with vacuum pressure or gripper cycle deviations logged by the depanner controller. Inspection cameras downstream flag broken or deformed product in bursts that align with specific pan sets or baking batches.

Countermeasure

Engineering guidance

Maintain pan condition and release-agent application, adjust baking temperature and time profile to ensure proper crust set before depanning, and calibrate the depanner's vacuum, inversion or gripper settings to the product and pan type.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Defect rate: 0.500 % · as reported: “roti sobek (torn bread)”
    Show verbatim quote
    Jenis cacat yang paling banyak yaitu cacat roti bakar yang sobek, pada bulan februari 2024 yaitu mencapai 38 pcs dari 7807 jumlah produksi selama satu bulan yaitu memiliki presentase 0,5%.
  2. Number of events: 38.0 pcs · as reported: “roti sobek (torn bread)”
    Show verbatim quote
    Jenis cacat yang paling banyak yaitu cacat roti bakar yang sobek, pada bulan februari 2024 yaitu mencapai 38 pcs dari 7807 jumlah produksi selama satu bulan yaitu memiliki presentase 0,5%.
  3. Defect rate: 17.4 % · as reported: “Depanner”
    Show verbatim quote
    Analysis showed that the Imprinter caused 53% of breakdown-related waste (32.7% of total), followed by the Depanner at 17.4% and Ingredient Mixing at 12.9%.