Discharge conveyor failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 86 studies that could observe it (sparse evidence).
What happens
The conveyor that carries product away from the machine experiences a mechanical, electrical or drive-related breakdown (e.g. belt or chain failure, motor or gearbox fault, broken roller, sensor malfunction) that stops it from moving product, requiring maintenance intervention to restore function. Because it sits at the exit of the process, its stoppage immediately halts the flow of finished or semi-finished units leaving the equipment.
What is done about it
Apply preventive maintenance on drive components, belts/chains, bearings and sensors of the discharge conveyor, including lubrication schedules and vibration or load monitoring to detect degradation before failure. Install local buffering or diagnostic alarms that allow early intervention and rapid fault isolation to minimize downstream line impact.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.7% [0.1–1.9%]
- Expected share of lost time
- 0.4% [0.1–1.1%]
- Share of lost time when present
- 57% [46–68%]
- Studies / units
- 86 / 112
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.8% [0.1–2.9%]11 studies
- Soft drinks, bottled water and juices0.9% [0.1–2.9%]28 studies
- Brewing, wine and spirits0.7% [0.1–2.6%]12 studies
- Bakery and pasta0.8% [0.1–3.1%]0 studies
- Meat, poultry and seafood0.8% [0.1–3.0%]5 studies
- Fruit and vegetable processing0.8% [0.1–2.9%]4 studies
- Grain and oilseed milling0.8% [0.1–3.0%]4 studies
- Sugar and confectionery0.8% [0.1–3.0%]4 studies
- Snacks, coffee, tea and other foods0.8% [0.1–2.9%]4 studies
- Animal feed and pet food0.8% [0.1–3.0%]5 studies
- Food manufacturing (unspecified or mixed)0.8% [0.1–3.0%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe conveyor that carries product away from the machine experiences a mechanical, electrical or drive-related breakdown (e.g. belt or chain failure, motor or gearbox fault, broken roller, sensor malfunction) that stops it from moving product, requiring maintenance intervention to restore function. Because it sits at the exit of the process, its stoppage immediately halts the flow of finished or semi-finished units leaving the equipment.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show the discharge conveyor transitioning to a fault or stopped state with an associated maintenance alarm (drive fault, overload, motor trip, encoder loss), while upstream equipment registers blocking as product accumulates and cannot be evacuated. The event duration typically exceeds the short-stop threshold and is tagged against the conveyor asset rather than the main process machine.
Countermeasure
Engineering guidanceApply preventive maintenance on drive components, belts/chains, bearings and sensors of the discharge conveyor, including lubrication schedules and vibration or load monitoring to detect degradation before failure. Install local buffering or diagnostic alarms that allow early intervention and rapid fault isolation to minimize downstream line impact.
4Sources
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceLost time: 455 min · as reported: “discharge conveyor”
Show verbatim quote
discharge conveyor 20 455 281 5182 84.13 82.62
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceNumber of events: 20.0 events · as reported: “discharge conveyor”
Show verbatim quote
discharge conveyor 20 455 281 5182 84.13 82.62

