foratvise
Get Started
Equipment failure (breakdowns)

Dosing hose clogging

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).

What happens

Residual product, dried solids, foreign particles or crystallized deposits accumulate inside the flexible hose that carries product to the filling nozzle, progressively narrowing or fully blocking the internal passage. This restricts or stops the flow of product to the valve, requiring the line to stop while the hose is cleared, flushed or replaced.

What is done about it

Apply a cleaning and flushing schedule matched to product characteristics, including periodic CIP or manual purging of dosing hoses, and inspect hoses for wear, kinking or material buildup during preventive maintenance. Where recurrent clogging occurs, review hose material, bore diameter and routing, and consider filters or strainers upstream to capture particles before they reach the hose.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
58% [48–69%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.2%]18 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.7%]44 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]16 studies
  • Bakery and pasta
    0.7% [0.1–2.8%]0 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.4%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.4%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.5%]6 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.3%]6 studies
  • Animal feed and pet food
    0.7% [0.1–2.5%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.4%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Residual product, dried solids, foreign particles or crystallized deposits accumulate inside the flexible hose that carries product to the filling nozzle, progressively narrowing or fully blocking the internal passage. This restricts or stops the flow of product to the valve, requiring the line to stop while the hose is cleared, flushed or replaced.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows the filling station or dosing pump in fault or stopped state with low or zero flow readings despite the pump running, often paired with underfill or no-fill alarms at the affected head and a drop in instantaneous line throughput. Repeated short-cycle stops isolated to one nozzle or dosing line, followed by a maintenance-coded stop for hose clearing or replacement, are typical signatures.

Countermeasure

Engineering guidance

Apply a cleaning and flushing schedule matched to product characteristics, including periodic CIP or manual purging of dosing hoses, and inspect hoses for wear, kinking or material buildup during preventive maintenance. Where recurrent clogging occurs, review hose material, bore diameter and routing, and consider filters or strainers upstream to capture particles before they reach the hose.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 3.00 /Ciclo · as reported: “Mangueras Tapadas”
    Show verbatim quote
    Mangueras Tapadas 4/Ciclo 3/Ciclo -25.0%
  2. Number of events: 4.00 /Ciclo · as reported: “Mangueras Tapadas”
    Show verbatim quote
    Mangueras Tapadas 4/Ciclo 3/Ciclo -25.0%