Expedition feed conveyor failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 86 studies that could observe it (sparse evidence).
What happens
One of the several feed entry points that supply finished product onto the expedition/dispatch conveyor loses function due to a mechanical, electrical or sensor fault, stopping the transfer of units at that entry. Because several entries feed the same downstream conveying path, a fault at any single entry point halts product flow from that source until repaired.
What is done about it
Apply condition monitoring and scheduled preventive maintenance on motors, rollers, chains and sensors at each feed entry point, and standardize quick-swap spare modules to restore the affected entry without stopping the other feed points.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.7% [0.1–2.0%]
- Expected share of lost time
- 0.4% [0.1–1.1%]
- Share of lost time when present
- 58% [47–68%]
- Studies / units
- 86 / 112
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.8% [0.1–3.1%]11 studies
- Soft drinks, bottled water and juices0.7% [0.1–2.3%]28 studies
- Brewing, wine and spirits0.8% [0.1–2.7%]12 studies
- Bakery and pasta0.8% [0.1–3.2%]0 studies
- Meat, poultry and seafood0.8% [0.1–2.8%]5 studies
- Fruit and vegetable processing0.8% [0.1–2.9%]4 studies
- Grain and oilseed milling0.8% [0.1–3.1%]4 studies
- Sugar and confectionery0.8% [0.1–2.9%]4 studies
- Snacks, coffee, tea and other foods0.8% [0.1–2.9%]4 studies
- Animal feed and pet food1.2% [0.1–4.6%]5 studies
- Food manufacturing (unspecified or mixed)0.8% [0.1–2.9%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceOne of the several feed entry points that supply finished product onto the expedition/dispatch conveyor loses function due to a mechanical, electrical or sensor fault, stopping the transfer of units at that entry. Because several entries feed the same downstream conveying path, a fault at any single entry point halts product flow from that source until repaired.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show a fault or stop alarm localized to a specific feed entry point on the expedition conveyor, with motor current drop or drive fault code, while other entries remain active; downstream expedition buffer shows starvation from that branch and the associated entry counter freezes.
Countermeasure
Engineering guidanceApply condition monitoring and scheduled preventive maintenance on motors, rollers, chains and sensors at each feed entry point, and standardize quick-swap spare modules to restore the affected entry without stopping the other feed points.
4Sources
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Open sourceLost time: 0.106 Kg.h-1 · as reported: “Expedition (feed, first entry)”
Show verbatim quote
5Expedition 10.24 0.010 ± 0.003 0.106 ± 0.031 Kg 1.32
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Open sourceLost time: 0.123 Kg.h-1 · as reported: “Expedition (feed, second entry)”
Show verbatim quote
5Expedition 10.24 0.012 ± 0.004 0.123 ± 0.041 Kg 1.53
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Open sourceLost time: 0.134 Kg.h-1 · as reported: “Expedition (feed, third entry)”
Show verbatim quote
5Expedition 10.24 0.013 ± 0.002 0.134 ± 0.020 Kg 1.67
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Open sourceLost time: 0.120 Kg.h-1 · as reported: “Expedition (feed, fourth entry)”
Show verbatim quote
5Expedition 10.24 0.012 ± 0.005 0.120 ± 0.051 Kg 1.49
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Open sourceLost time: 0.135 Kg.h-1 · as reported: “Expedition (feed, fifth entry)”
Show verbatim quote
5Expedition 10.24 0.013 ± 0.004 0.135 ± 0.041 Kg 1.69

