Filler Sealing Pad Wear/Failure
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
The elastomeric sealing pads that close the filling valves or nozzles against the container mouth degrade through repeated compression cycles, exposure to product chemistry and cleaning agents, and thermal cycling. As the pad surface hardens, cracks or deforms, it can no longer form a tight seal, allowing product to leak, drip, or fill inconsistently until the pad is replaced.
What is done about it
Establish a preventive replacement schedule for sealing pads based on cycle counts or elapsed service time rather than waiting for failure, and select elastomer materials with better resistance to the product and cleaning chemistry in use. Keep spare pads staged near the filler for fast swap-out and inspect pad condition visually during routine changeovers or sanitation stops.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.2%]
- Expected share of lost time
- 0.2% [0.0–0.7%]
- Share of lost time when present
- 58% [46–68%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.7%]18 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.3%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.7%]16 studies
- Bakery and pasta0.5% [0.0–1.8%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.8%]6 studies
- Fruit and vegetable processing0.5% [0.0–1.8%]4 studies
- Grain and oilseed milling0.5% [0.0–1.8%]6 studies
- Sugar and confectionery0.5% [0.0–2.0%]3 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.8%]6 studies
- Animal feed and pet food0.5% [0.0–1.8%]4 studies
- Food manufacturing (unspecified or mixed)0.5% [0.0–1.7%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe elastomeric sealing pads that close the filling valves or nozzles against the container mouth degrade through repeated compression cycles, exposure to product chemistry and cleaning agents, and thermal cycling. As the pad surface hardens, cracks or deforms, it can no longer form a tight seal, allowing product to leak, drip, or fill inconsistently until the pad is replaced.
How it looks in SCADA data
Engineering guidanceEquipment fault logs show repeated short-duration stops at individual filling heads with leak or seal-fault codes, fill weight or level readings drifting outside tolerance for specific valve positions, and increased frequency of manual intervention events at the filler station. Pressure or flow sensors on the filling manifold may show irregular drop-off patterns correlated with particular nozzle numbers.
Countermeasure
Engineering guidanceEstablish a preventive replacement schedule for sealing pads based on cycle counts or elapsed service time rather than waiting for failure, and select elastomer materials with better resistance to the product and cleaning chemistry in use. Keep spare pads staged near the filler for fast swap-out and inspect pad condition visually during routine changeovers or sanitation stops.
4Sources
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Open sourceTime between events: 29,960 not reported · as reported: “Filling Sealing Pads”
Show verbatim quote
Waktu Kerusakan Weibull MTTF 29959,67
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Open sourceMean event duration: 235 not reported · as reported: “Filling Sealing Pads”
Show verbatim quote
Waktu Perbaikan Weibull MTTR 235

