foratvise
Get Started
Equipment failure (breakdowns)

Filler support/bracket mechanical failure

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

A structural or mechanical support element of the filling station (bracket, frame support, or guide that holds moving parts in position) wears, loosens, cracks or breaks under repeated vibration and mechanical load. This causes misalignment of the filling heads, nozzles or container-handling mechanism, leading to loss of function until the part is repaired or replaced.

What is done about it

Implement scheduled inspection and preventive replacement of wear-prone support and bracket components based on condition monitoring (vibration, visual cracking checks), and reinforce or redesign the mount if recurring failures indicate an undersized or fatigued part.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.7%]
Share of lost time when present
57% [46–68%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]18 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.3%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]16 studies
  • Bakery and pasta
    0.5% [0.0–1.9%]0 studies
  • Meat, poultry and seafood
    0.5% [0.0–1.8%]6 studies
  • Fruit and vegetable processing
    0.5% [0.0–1.9%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–1.8%]6 studies
  • Sugar and confectionery
    0.5% [0.0–1.9%]3 studies
  • Snacks, coffee, tea and other foods
    0.5% [0.0–1.7%]6 studies
  • Animal feed and pet food
    0.5% [0.0–1.7%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.6%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A structural or mechanical support element of the filling station (bracket, frame support, or guide that holds moving parts in position) wears, loosens, cracks or breaks under repeated vibration and mechanical load. This causes misalignment of the filling heads, nozzles or container-handling mechanism, leading to loss of function until the part is repaired or replaced.

How it looks in SCADA data

Engineering guidance

Unplanned downtime event logged at the filler with a fault or mechanical-stop alarm, often preceded by vibration, position or torque deviations on related axes. Repeated short stoppages or a single extended stop state appear, with the filler state changing to fault/maintenance and upstream/downstream equipment entering blocked or starved states.

Countermeasure

Engineering guidance

Implement scheduled inspection and preventive replacement of wear-prone support and bracket components based on condition monitoring (vibration, visual cracking checks), and reinforce or redesign the mount if recurring failures indicate an undersized or fatigued part.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Time between events: 27.7 not reported · as reported: “Spie Support”
    Show verbatim quote
    Waktu Kerusakan Lognormal MTTF 27,664
  2. Mean event duration: 248 not reported · as reported: “Spie Support”
    Show verbatim quote
    Waktu Perbaikan Weibull MTTR 248