Film cutter/sealer blade failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).
What happens
The heated cutting/sealing blade of the film wrapping machine wears, loses temperature control, or becomes misaligned, so it no longer severs the film cleanly across its width. The incomplete cut jams the film web and forces the wrapper into a fault state until maintenance clears the blade or adjusts the sealing unit.
What is done about it
Apply a preventive maintenance schedule for blade sharpening or replacement and for calibration of the sealing-bar temperature and pressure, and verify film tension and alignment at each product changeover. Install condition monitoring on the cutter heater and blade actuator to trigger maintenance before a full breakdown occurs.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.6%]
- Expected share of lost time
- 0.3% [0.1–1.0%]
- Share of lost time when present
- 58% [46–68%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.7% [0.1–2.5%]14 studies
- Soft drinks, bottled water and juices0.8% [0.1–2.5%]33 studies
- Brewing, wine and spirits0.6% [0.1–2.4%]14 studies
- Bakery and pasta0.7% [0.1–2.6%]6 studies
- Meat, poultry and seafood0.7% [0.1–2.6%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.7%]4 studies
- Grain and oilseed milling0.7% [0.1–2.6%]4 studies
- Sugar and confectionery0.7% [0.1–2.6%]4 studies
- Snacks, coffee, tea and other foods0.7% [0.1–2.6%]8 studies
- Animal feed and pet food0.7% [0.1–2.5%]5 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.3%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe heated cutting/sealing blade of the film wrapping machine wears, loses temperature control, or becomes misaligned, so it no longer severs the film cleanly across its width. The incomplete cut jams the film web and forces the wrapper into a fault state until maintenance clears the blade or adjusts the sealing unit.
How it looks in SCADA data
Engineering guidanceThe packaging machine state log shows a transition from running to fault/breakdown with an associated downtime counter increment, often preceded by repeated short cycle-time deviations on the cutting station. Film-sensor or photo-eye signals at the cutter may flag web jams or missed cuts immediately before the stop is logged.
Countermeasure
Engineering guidanceApply a preventive maintenance schedule for blade sharpening or replacement and for calibration of the sealing-bar temperature and pressure, and verify film tension and alignment at each product changeover. Install condition monitoring on the cutter heater and blade actuator to trigger maintenance before a full breakdown occurs.
4Sources
- การเพิ่มประสิทธิภาพการบำรุงรักษาเครื่องจักรในกระบวนการผลิต กรณีศึกษาโรงงานผลิตเครื่องดื่ม (2021)Open sourceLost time: 983 นาที/เดือน · as reported: “เครื่องแพ็คฟิล์ม Breakdown”
Show verbatim quote
เวลาสูญเสียจากเครื่องแพ็คฟิล์ม Breakdown เฉลี่ยต่อเดือนจากค่าก่อนปรับปรุง 1,393 นาที หลังปรับปรุงมีค่าลดลง 983 นาที คิดเป็นร้อยละ 29.45
- การเพิ่มประสิทธิภาพการบำรุงรักษาเครื่องจักรในกระบวนการผลิต กรณีศึกษาโรงงานผลิตเครื่องดื่ม (2021)Open sourceLost time: 1,393 นาที/เดือน · as reported: “เครื่องแพ็คฟิล์ม Breakdown”
Show verbatim quote
เวลาสูญเสียจากเครื่องแพ็คฟิล์ม Breakdown เฉลี่ยต่อเดือนจากค่าก่อนปรับปรุง 1,393 นาที หลังปรับปรุงมีค่าลดลง 983 นาที คิดเป็นร้อยละ 29.45
- การเพิ่มประสิทธิภาพการบำรุงรักษาเครื่องจักรในกระบวนการผลิต กรณีศึกษาโรงงานผลิตเครื่องดื่ม (2021)Open sourceLost time: 7,426 นาที · as reported: “ฟิล์มตัดไม่ขาด”
Show verbatim quote
ซึ่งพบว่าเครื่องแพ็คฟิล์มมีปัญหาฟิล์มตัดไม่ขาดเป็นปัญหาหลัก สูงถึง 7,426 นาที
- การเพิ่มประสิทธิภาพการบำรุงรักษาเครื่องจักรในกระบวนการผลิต กรณีศึกษาโรงงานผลิตเครื่องดื่ม (2021)Open sourceLost time: 4,306 นาที · as reported: “เวลาเครื่องจักรเสีย”
Show verbatim quote
เวลาเครื่องจักรเสีย (นาที) 4,306 3,361
- การเพิ่มประสิทธิภาพการบำรุงรักษาเครื่องจักรในกระบวนการผลิต กรณีศึกษาโรงงานผลิตเครื่องดื่ม (2021)Open sourceLost time: 3,361 นาที · as reported: “เวลาเครื่องจักรเสีย”
Show verbatim quote
เวลาเครื่องจักรเสีย (นาที) 4,306 3,361

