foratvise
Get Started
Equipment failure (breakdowns)

Film handling and wrapping system failure

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 2 of the 112 studies that could observe it (limited evidence).

What happens

Mechanical or electrical degradation of the film unwind, tensioning, feeding, cutting or sealing components of the wrapping station leads to loss of the machine's basic function, such as broken drive belts, worn rollers, misaligned film guides, faulty sealing bars or defective sensors. The fault prevents the wrapper from continuing to form, seal or advance film and forces the line to stop until a technician intervenes.

What is done about it

Apply a preventive maintenance plan that inspects and replaces wear parts such as rollers, belts, tensioners, sealing elements and sensors on a condition-based schedule, and calibrate film tracking and tension control regularly. Keep critical spare parts available and train operators to recognize early warning signs so repairs can be scheduled before a breakdown occurs.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.2–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
57% [46–67%]
Studies / units
112 / 155
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–3.0%]14 studies
  • Soft drinks, bottled water and juices
    1.3% [0.2–3.8%]33 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.7%]14 studies
  • Bakery and pasta
    0.9% [0.1–3.3%]6 studies
  • Meat, poultry and seafood
    0.9% [0.1–3.1%]6 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.0%]4 studies
  • Grain and oilseed milling
    0.9% [0.1–2.9%]4 studies
  • Sugar and confectionery
    0.9% [0.1–3.1%]4 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.0%]8 studies
  • Animal feed and pet food
    0.9% [0.1–2.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.7%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Mechanical or electrical degradation of the film unwind, tensioning, feeding, cutting or sealing components of the wrapping station leads to loss of the machine's basic function, such as broken drive belts, worn rollers, misaligned film guides, faulty sealing bars or defective sensors. The fault prevents the wrapper from continuing to form, seal or advance film and forces the line to stop until a technician intervenes.

How it looks in SCADA data

Engineering guidance

MES/SCADA logs show the wrapper entering a fault or downtime state with an associated maintenance alarm code, often accompanied by repeated film-break or tension sensor triggers before the stop, and a stop duration long enough to require manual intervention. Upstream buffers fill and downstream stations starve while the wrapping machine remains in fault state.

Countermeasure

Engineering guidance

Apply a preventive maintenance plan that inspects and replaces wear parts such as rollers, belts, tensioners, sealing elements and sensors on a condition-based schedule, and calibrate film tracking and tension control regularly. Keep critical spare parts available and train operators to recognize early warning signs so repairs can be scheduled before a breakdown occurs.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 25.0 events · as reported: “Film handling and wrapping system”
    Show verbatim quote
    ระบบจัดการฟิล์มและห่อหุ้ม 25 20.00
  2. Share of loss events: 20.0 % · as reported: “Film handling and wrapping system”
    Show verbatim quote
    ระบบจัดการฟิล์มและห่อหุ้ม 25 20.00
  3. Time between events: 144 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    1 ลูกปืน Roller 1 13-01-19 25-06-19 144 76,032,000
  4. Time between events: 160 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    2 ลูกปืน Roller 2 13-01-19 15-07-19 160 84,480,000
  5. Time between events: 137 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    3 ลูกปืน Roller 3 13-01-19 15-06-19 137 72,336,000
  6. Time between events: 170 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    1 ลูกปืน Roller 1 05-01-20 05-01-20 170 89,760,000
  7. Time between events: 135 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    2 ลูกปืน Roller 2 05-01-20 15-12-19 135 71,280,000
  8. Time between events: 180 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    3 ลูกปืน Roller 3 05-01-20 05-01-20 180 95,040,000
  9. Time between events: 150 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด”
    Show verbatim quote
    4 ลูกปืน Roller 4 05-01-20 05-01-20 150 79,200,000
  10. Time between events: 155 วัน · as reported: “ลูกปืนลูกกลิ้งรีดฟิล์มแตกชำรุดก่อนกำหนด (ค่าเฉลี่ย)”
    Show verbatim quote
    อายุการใช้งานลูกปืนมีค่าเฉลี่ยที่เหมาะสมเท่ากับ 154.5 วัน หรือประมาณ 5 เดือน โดยมีค่าเบี่ยงเบนมาตรฐาน เท่ากับ 15.89
  11. Time between events: 181 วัน · as reported: “ใบมีดตัดฟิล์มชำรุดก่อนแผนซ่อมบำรุง”
    Show verbatim quote
    1 25-07-19 181 7,964,000 95,568,000
  12. Time between events: 162 วัน · as reported: “ใบมีดตัดฟิล์มชำรุดก่อนแผนซ่อมบำรุง”
    Show verbatim quote
    2 13-01-20 162 7,128,000 85,536,000
  13. Time between events: 172 วัน · as reported: “ใบมีดตัดฟิล์มชำรุดก่อนแผนซ่อมบำรุง (ค่าเฉลี่ย)”
    Show verbatim quote
    อายุการใช้งานของใบมีดตัดฟิล์มมีอายุการใช้งานเฉลี่ยที่เหมาะสมเท่ากับ 171.5 วัน หรือประมาณ 6 เดือน โดยมีค่าเบี่ยงเบนมาตรฐาน เท่ากับ 13.44