foratvise
Get Started
Equipment failure (breakdowns)

Grain pre-cleaning equipment failure

Equipment failure (breakdowns)AvailabilityMilling and grinding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 43 studies that could observe it (sparse evidence).

What happens

Pre-cleaning machinery that removes stones, dust, chaff and foreign material from incoming corn grain (screens, aspirators, destoners, magnets) degrades or jams due to wear, fatigue of moving parts, dust ingress or accumulation of debris, causing the equipment to stop functioning and halting the flow of grain into the milling process.

What is done about it

Implement preventive maintenance on screens, aspirators, destoners and magnets, including scheduled cleaning, wear-part replacement and vibration or amperage monitoring, and keep critical spare parts on hand to minimize repair time when failures occur.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.9%]
Expected share of lost time
0.5% [0.1–1.7%]
Share of lost time when present
58% [46–68%]
Studies / units
43 / 48
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.1% [0.1–4.4%]5 studies
  • Soft drinks, bottled water and juices
    1.1% [0.1–4.3%]1 study
  • Brewing, wine and spirits
    1.1% [0.1–4.3%]0 studies
  • Bakery and pasta
    1.2% [0.1–4.7%]0 studies
  • Meat, poultry and seafood
    1.2% [0.1–4.8%]0 studies
  • Fruit and vegetable processing
    1.1% [0.1–4.6%]2 studies
  • Grain and oilseed milling
    1.1% [0.1–4.1%]7 studies
  • Sugar and confectionery
    1.1% [0.1–3.9%]10 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.6%]5 studies
  • Animal feed and pet food
    1.5% [0.2–6.0%]6 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–4.4%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Pre-cleaning machinery that removes stones, dust, chaff and foreign material from incoming corn grain (screens, aspirators, destoners, magnets) degrades or jams due to wear, fatigue of moving parts, dust ingress or accumulation of debris, causing the equipment to stop functioning and halting the flow of grain into the milling process.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows unplanned downtime states on the pre-cleaning station, motor overload or trip alarms, screen or sieve blockage sensors triggering, abnormal vibration or amperage readings, and starvation of the downstream milling equipment reflected in reduced infeed flow or buffer level drops.

Countermeasure

Engineering guidance

Implement preventive maintenance on screens, aspirators, destoners and magnets, including scheduled cleaning, wear-part replacement and vibration or amperage monitoring, and keep critical spare parts on hand to minimize repair time when failures occur.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 0.554 Kg.h-1 · as reported: “Pre-cleaning sector (corn grains)”
    Show verbatim quote
    Pre-cleaning 36 0.015 ± 0.024 0.554 ± 0.864 Kg 1.24