foratvise
Get Started
Process defects (scrap and rework)

Husker roll clearance/speed mismatch

Process defects (scrap and rework)QualityMilling and grinding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 43 studies that could observe it (sparse evidence).

What happens

The rubber-roll husker removes the hull from paddy by shearing it between two rollers turning at different speeds; when the clearance or speed differential is not matched to the grain size and moisture of the incoming paddy, excessive compressive and shear force cracks and breaks kernels, generating broken brown rice and fine groats. Conversely, insufficient clearance or speed differential fails to shear off the hull, leaving a fraction of unhulled paddy in the discharge stream.

What is done about it

Periodically check and adjust roller clearance and differential speed to match paddy variety, grain size and moisture content, and replace worn or unevenly worn rubber rolls before they distort the shear gap. Where available, use automated gap control linked to in-line moisture or size sensors and routine sampling of husker output to keep breakage and unhulled fractions within target.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.9% [0.2–2.6%]
Expected share of lost time
0.4% [0.1–1.3%]
Share of lost time when present
48% [35–60%]
Studies / units
43 / 48
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.0% [0.1–4.0%]5 studies
  • Soft drinks, bottled water and juices
    1.1% [0.1–4.3%]1 study
  • Brewing, wine and spirits
    1.1% [0.1–4.2%]0 studies
  • Bakery and pasta
    1.1% [0.1–4.2%]0 studies
  • Meat, poultry and seafood
    1.1% [0.1–4.1%]0 studies
  • Fruit and vegetable processing
    1.0% [0.1–4.1%]2 studies
  • Grain and oilseed milling
    1.5% [0.1–5.9%]7 studies
  • Sugar and confectionery
    1.0% [0.1–3.5%]10 studies
  • Snacks, coffee, tea and other foods
    1.0% [0.1–3.9%]5 studies
  • Animal feed and pet food
    1.0% [0.1–3.8%]6 studies
  • Food manufacturing (unspecified or mixed)
    1.0% [0.1–4.0%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The rubber-roll husker removes the hull from paddy by shearing it between two rollers turning at different speeds; when the clearance or speed differential is not matched to the grain size and moisture of the incoming paddy, excessive compressive and shear force cracks and breaks kernels, generating broken brown rice and fine groats. Conversely, insufficient clearance or speed differential fails to shear off the hull, leaving a fraction of unhulled paddy in the discharge stream.

How it looks in SCADA data

Engineering guidance

Quality/MES data show simultaneous increases in broken-rice and groats reject counters together with a rise in unhulled-paddy recycle volume to the husker, while the husker itself reports no fault or stoppage alarm and roller motor current/torque and throughput remain within the normal operating band, indicating a quality loss rather than an availability loss.

Countermeasure

Engineering guidance

Periodically check and adjust roller clearance and differential speed to match paddy variety, grain size and moisture content, and replace worn or unevenly worn rubber rolls before they distort the shear gap. Where available, use automated gap control linked to in-line moisture or size sensors and routine sampling of husker output to keep breakage and unhulled fractions within target.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Defect rate: 4.30 % · as reported: “beras pecah kulit pecah (broken brown rice)”
    Show verbatim quote
    Persentase beras pecah kulit pecah % 4,3±0,46
  2. Defect rate: 0.270 % · as reported: “beras pecah kulit menir (groats/broken fines)”
    Show verbatim quote
    Persentase beras pecah kulit menir % 0,27±0,08
  3. Defect rate: 19.0 % · as reported: “gabah tidak terkupas (unhulled paddy)”
    Show verbatim quote
    Persentase gabah (tidak terkupas) % 19±0,01